From: Georgi Vlaev <gvl...@juniper.net>
Add device tree bindings document for the SAM MDIO block
present in Juniper's SAM FPGA.
Signed-off-by: Georgi Vlaev <gvl...@juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.anton...@konsulko.com>
---
Documentation/devicetree/bindings/net/mdio-sam.txt | 48 ++++++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/mdio-sam.txt
diff --git a/Documentation/devicetree/bindings/net/mdio-sam.txt
b/Documentation/devicetree/bindings/net/mdio-sam.txt
new file mode 100644
index 0000000..7d354e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mdio-sam.txt
@@ -0,0 +1,48 @@
+Juniper SAM FPGA MFD MDIO bus properties.
+
+Required properties:
+- compatible : "jnx,mdio-sam"
+- reg : The start offset of the MDIO bus range
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The MDIO bus offset within the MDIO range.
+
+
+Example :
+
+ sam@10 {
+ compatible = "jnx,sam";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio-sam@10 {
+ compatible = "jnx,mdio-sam";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x40000>;
+
+ mdio0: mdio-sam@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+ };
+
+ mdio1: mdio-sam@4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4000>;
+ };
+
+ mdio2: mdio-sam@8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x8000>;
+ };
+ };
+ };
--
1.9.1
