> On Oct 7, 2016, at 18:39 , Greg Kroah-Hartman <gre...@linuxfoundation.org> > wrote: > > On Fri, Oct 07, 2016 at 06:20:08PM +0300, Pantelis Antoniou wrote: >> Add Juniper's PTX1K CBC FPGA driver. Those FPGAs >> are present in Juniper's PTX series of routers. >> >> The MFD driver provices a gpio device and a special >> driver for Juniper's board infrastucture. >> The FPGA infrastucture driver is providing an interface >> for user-space handling of the FPGA in those platforms. >> >> There are full device tree binding documents for the >> master mfd driver and for the slave driver. >> >> This patchset is against mainline as of today: v4.8-9431-g3477d16 >> and is dependent on the "Juniper prerequisites" and >> "Juniper infrastructure" patchsets sent earlier. >> >> Georgi Vlaev (5): >> mfd: Add support for the PTX1K CBC FPGA >> gpio: Add support for PTX1K CBC FPGA spare GPIOs >> gpio: gpio-cbc: Document bindings of CBC FPGA GPIO block >> gpio: cbc-presence: Add CBC presence detect as GPIO driver >> gpio: gpio-cbc-presense: Document bindings of CBC FPGA presence >> >> Tom Kavanagh (1): >> staging: jnx: CBD-FPGA infrastructure >> >> .../bindings/gpio/jnx,gpio-cbc-presense.txt | 31 + >> .../devicetree/bindings/gpio/jnx,gpio-cbc.txt | 30 + >> drivers/gpio/Kconfig | 23 + >> drivers/gpio/Makefile | 2 + >> drivers/gpio/gpio-cbc-presence.c | 460 ++++++++++ >> drivers/gpio/gpio-cbc.c | 236 +++++ >> drivers/mfd/Kconfig | 16 + >> drivers/mfd/Makefile | 1 + >> drivers/mfd/cbc-core.c | 971 >> +++++++++++++++++++++ >> drivers/staging/jnx/Kconfig | 34 + >> drivers/staging/jnx/Makefile | 5 + >> drivers/staging/jnx/jnx-cbc-ptx1k.c | 242 +++++ >> drivers/staging/jnx/jnx-cbd-fpga-common.c | 332 +++++++ >> drivers/staging/jnx/jnx-cbd-fpga-common.h | 27 + >> drivers/staging/jnx/jnx-cbd-fpga-core.c | 540 ++++++++++++ >> drivers/staging/jnx/jnx-cbd-fpga-core.h | 68 ++ >> drivers/staging/jnx/jnx-cbd-fpga-platdata.h | 51 ++ >> drivers/staging/jnx/jnx-cbd-fpga-ptx1k.c | 134 +++ >> drivers/staging/jnx/jnx-cbd-fpga-ptx21k.c | 143 +++ >> drivers/staging/jnx/jnx-cbd-fpga-ptx3k.c | 111 +++ >> drivers/staging/jnx/jnx-cbd-fpga-ptx5k.c | 107 +++ >> include/linux/mfd/cbc-core.h | 181 ++++ >> 22 files changed, 3745 insertions(+) > > Please don't mix driver submissions like this. Staging stuff needs to > go to the staging maintainer, gpio to that one, mfd to that one, and so > on. > > there's almost nothing anyone can do with this series as-is, sorry. > > please split it up. >
Well, it’s an MFD driver, there is dependence; will split up. > thanks, > > greg k-h
