Hi Archit,

On Fri, Oct 14, 2016 at 04:20:14PM +0530, Archit Taneja wrote:
Hi Brian,

On 10/11/2016 08:23 PM, Brian Starkey wrote:

This RFC series introduces a new connector type:
It is a follow-on from a previous discussion: [1]

Writeback connectors are used to expose the memory writeback engines
found in some display controllers, which can write a CRTC's
composition result to a memory buffer.
This is useful e.g. for testing, screen-recording, screenshots,
wireless display, display cloning, memory-to-memory composition.

Patches 1-7 include the core framework changes required, and patches
8-11 implement a writeback connector for the Mali-DP writeback engine.
The Mali-DP patches depend on this other series: [2].

The connector is given the FB_ID property for the output framebuffer,
and two new read-only properties: PIXEL_FORMATS and
PIXEL_FORMATS_SIZE, which expose the supported framebuffer pixel
formats of the engine.

The EDID property is not exposed for writeback connectors.

Writeback connector usage:
Due to connector routing changes being treated as "full modeset"
operations, any client which wishes to use a writeback connector
should include the connector in every modeset. The writeback will not
actually become active until a framebuffer is attached.

The writeback itself is enabled by attaching a framebuffer to the
FB_ID property of the connector. The driver must then ensure that the
CRTC content of that atomic commit is written into the framebuffer.

The writeback works in a one-shot mode with each atomic commit. This
prevents the same content from being written multiple times.
In some cases (front-buffer rendering) there might be a desire for
continuous operation - I think a property could be added later for
this kind of control.

Writeback can be disabled by setting FB_ID to zero.

Known issues:
* I'm not sure what "DPMS" should mean for writeback connectors.
  It could be used to disable writeback (even when a framebuffer is
  attached), or it could be hidden entirely (which would break the
  legacy DPMS call for writeback connectors).
* With Daniel's recent re-iteration of the userspace API rules, I
  fully expect to provide some userspace code to support this. The
  question is what, and where? We want to use writeback for testing,
  so perhaps some tests in igt is suitable.
* Documentation. Probably some portion of this cover letter needs to
  make it into Documentation/
* Synchronisation. Our hardware will finish the writeback by the next
  vsync. I've not implemented fence support here, but it would be an
  obvious addition.

See Also:
[1] https://lists.freedesktop.org/archives/dri-devel/2016-July/113197.html
[2] https://lists.freedesktop.org/archives/dri-devel/2016-October/120486.html

I welcome any comments, especially if this approach does/doesn't fit
well with anyone else's hardware.

Thanks for working on this! Some points below.

- Writeback hardware generally allows us to specify the region within
the framebuffer we want to write to. It's analogous to the SRC_X/Y/W/H
plane properties. We could have similar props for the writeback
connectors, and maybe set them to the FB_ID dimensions if they aren't
configured by userspace.

- Besides the above property, writeback hardware can have provisions
for scaling, color space conversion and rotation. This would mean that
we'd eventually add more writeback specific props/params in
drm_connector/drm_connector_state. Would we be okay adding more such
props for connectors?

I've wondered the same thing about bloating non-writeback connectors
with writeback-specific stuff. If it does become significant, maybe
we should subclass drm_connector and add a drm_writeback_state pointer
to drm_connector_state.

Ville touched on scaling support previously, suggesting adding a
fixed_mode property (for all types of connectors) - on writeback this
would represent scaling the framebuffer, and on normal connectors it
could control output scaling (like panel-fitting).

Certainly destination coords, color-space converstion etc. are things
that are worth adding, but IMO I'd rather keep this initial
implementation small so we can enable the basic case right away. For
the most part, the additional things are "just properties" which
should be easily added later without impacting the overall interface.






Brian Starkey (10):
 drm: add writeback connector type
 drm/fb-helper: skip writeback connectors
 drm: extract CRTC/plane disable from drm_framebuffer_remove
 drm: add __drm_framebuffer_remove_atomic
 drm: add fb to connector state
 drm: expose fb_id property for writeback connectors
 drm: add writeback-connector pixel format properties
 drm: mali-dp: rename malidp_input_format
 drm: mali-dp: add RGB writeback formats for DP550/DP650
 drm: mali-dp: add writeback connector

Liviu Dudau (1):
 drm: mali-dp: Add support for writeback on DP550/DP650

drivers/gpu/drm/arm/Makefile        |    1 +
drivers/gpu/drm/arm/malidp_crtc.c   |   10 ++
drivers/gpu/drm/arm/malidp_drv.c    |   25 +++-
drivers/gpu/drm/arm/malidp_drv.h    |    5 +
drivers/gpu/drm/arm/malidp_hw.c     |  104 ++++++++++----
drivers/gpu/drm/arm/malidp_hw.h     |   27 +++-
drivers/gpu/drm/arm/malidp_mw.c     |  268 +++++++++++++++++++++++++++++++++++
drivers/gpu/drm/arm/malidp_planes.c |    8 +-
drivers/gpu/drm/arm/malidp_regs.h   |   15 ++
drivers/gpu/drm/drm_atomic.c        |   40 ++++++
drivers/gpu/drm/drm_atomic_helper.c |    4 +
drivers/gpu/drm/drm_connector.c     |   79 ++++++++++-
drivers/gpu/drm/drm_crtc.c          |   14 +-
drivers/gpu/drm/drm_fb_helper.c     |    4 +
drivers/gpu/drm/drm_framebuffer.c   |  249 ++++++++++++++++++++++++++++----
drivers/gpu/drm/drm_ioctl.c         |    7 +
include/drm/drmP.h                  |    2 +
include/drm/drm_atomic.h            |    3 +
include/drm/drm_connector.h         |   15 ++
include/drm/drm_crtc.h              |   12 ++
include/uapi/drm/drm.h              |   10 ++
include/uapi/drm/drm_mode.h         |    1 +
22 files changed, 830 insertions(+), 73 deletions(-)
create mode 100644 drivers/gpu/drm/arm/malidp_mw.c

Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to