While at it, clean up some other things as well.

Signed-off-by: Peter Rosin <p...@axentia.se>
---
 .../devicetree/bindings/regulator/pwm-regulator.txt          | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt 
b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index 3aeba9f86ed8..6d98fbaeb506 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -55,11 +55,11 @@ Optional properties:
 - enable-gpios:                GPIO to use to enable/disable the regulator
 
 Any property defined as part of the core regulator binding can also be used.
-(See: ../regulator/regulator.txt)
+(See: regulator.txt)
 
 Continuous Voltage With Enable GPIO Example:
-       pwm_regulator {
-               compatible = "pwm-regulator;
+       pwm-regulator {
+               compatible = "pwm-regulator";
                pwms = <&pwm1 0 8448 0>;
                enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
                regulator-min-microvolt = <1016000>;
@@ -71,12 +71,12 @@ Continuous Voltage With Enable GPIO Example:
                 * Inverted PWM logic, and the duty cycle range is limited
                 * to 30%-70%.
                 */
-               pwm-dutycycle-range <700 300>; /* */
+               pwm-dutycycle-range <700 300>;
        };
 
 Voltage Table Example:
-       pwm_regulator {
-               compatible = "pwm-regulator;
+       pwm-regulator {
+               compatible = "pwm-regulator";
                pwms = <&pwm1 0 8448 0>;
                regulator-min-microvolt = <1016000>;
                regulator-max-microvolt = <1114000>;
-- 
2.1.4

Reply via email to