On Monday 17 Oct 2016 15:36:14 Steve Longerbeam wrote:
> On 10/16/2016 05:18 AM, Laurent Pinchart wrote:
> > On Wednesday 03 Aug 2016 11:03:45 Steve Longerbeam wrote:
> >> Parse the optional v4l2 endpoint DT node. If the bus type is
> >> V4L2_MBUS_BT656 and the endpoint node specifies "newavmode",
> >> configure the BT.656 bus in NEWAVMODE.
> >> Signed-off-by: Steve Longerbeam <steve_longerb...@mentor.com>
> >> ---
> >> v4: no changes
> >> v3:
> >> - the newavmode endpoint property is now private to adv7180.
> >> ---
> >> .../devicetree/bindings/media/i2c/adv7180.txt | 4 ++
> >> drivers/media/i2c/adv7180.c | 46 ++++++++++++++--
> >> 2 files changed, 47 insertions(+), 3 deletions(-)
> >> diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
> >> b/Documentation/devicetree/bindings/media/i2c/adv7180.txt index
> >> 0d50115..6c175d2 100644
> >> --- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
> >> +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
> >> @@ -15,6 +15,10 @@ Required Properties :
> >> "adi,adv7282"
> >> "adi,adv7282-m"
> >> +Optional Endpoint Properties :
> >> +- newavmode: a boolean property to indicate the BT.656 bus is operating
> >> + in Analog Device's NEWAVMODE. Valid for BT.656 busses only.
> > This is a vendor-specific property, it should be prefixed with "adi,".
> Ok, I'll do that in next version.
> > Could
> > you also explain how this mode works ? I'd like to make sure it qualifies
> > for a DT property.
> The blurb in the ADV718x manual is terse:
> "When NEWAVMODE is 0 (enabled), EAV/SAV codes are generated to
> suit Analog Devices encoders. No adjustments are possible."
> "Setting NEWAVMODE to 1 (default) enables the manual position
> of the VSYNC, FIELD, and AV codes using Register 0x32 to
> Register 0x33 and Register 0xE5 to Register 0xEA. Default register
> settings are CCIR656 compliant;"
> So it's not clear to me how the generated EAV and SAV codes are
> different from standard CCIR656, but apparently they are.
Shouldn't we understand how it works to create proper DT bindings ? :-)