From: Linus Walleij <linus.wall...@linaro.org> The idea is to give useful names to GPIO lines that an implementer will be using from userspace, e.g. for maker type projects. These are user-visible using tools/gpio/lsgpio.c
v2: Major rewrite by anholt: Flatten each GPIO line to a line in the file for better diffing, prefix all expansion header pins with "P<number>" or "P5HEADER_P<number>" and drop the mostly-unused GPIO_GEN<smallnumber> names in favor of GPIO<socgpionumber>, fix extra '[]' on a couple of lines, fix locations of SD_CARD_DETECT, CAM_GPIO and STATUS_LED, fix HDMI_HPD polarities, rewrite A+ using unreleased schematics. Signed-off-by: Linus Walleij <linus.wall...@linaro.org> Signed-off-by: Eric Anholt <e...@anholt.net> --- Note: I haven't actually booted these and checked that the names line up, just tried to visually review them. Hopefully with more GPIO<number> values, it's easier to spot errors. The only other thing here I think I would do is drop the [] around names for behavior when pinmuxed. I find it more confusing than helpful. Linus, are these names considered ABI? Will we be locked into whatever set of names we merge and release? My assumption would be "yes". arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 66 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi-a.dts | 68 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 67 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 67 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm2835-rpi-b.dts | 68 ++++++++++++++++++++++++++++++++ 5 files changed, 336 insertions(+) diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 21507c922783..cec4c6e49e7b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -22,6 +22,72 @@ }; &gpio { + /* + * This is based on the unreleased schematic for the Model A+. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "[FOO]" = pin is muxed for peripheral FOO (not GPIO) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "[SDA0]", + "[SCL0]", + "[P3_SDA1]", + "[P5_SCL1]", + "[P7_GPIO_GCLK]", + "P29_GPIO5", + "P31_GPIO6", + "[P26_SPI_CE1_N]", + "[P24_SPI_CE0_N]", + "[P21_SPI_MISO]", + "[P19_SPI_MOSI]", + "[P23_SPI_SCLK]", + "P32_GPIO12", + "P33_GPIO13", + /* Serial port */ + "[P8_TXD0]", + "[P10_RXD0]", + "P36_GPIO16", + "P11_GPIO17", + "P12_GPIO18", + "P35_GPIO19", + "P38_GPIO20", + "P40_GPIO21", + "P15_GPIO22", + "P16_GPIO23", + "P18_GPIO24", + "P22_GPIO25", + "P37_GPIO26", + "P13_GPIO27", + "[SDA0]", + "[SCL0]", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "[PWM0_OUT]", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "[PWM1_OUT]", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "[SD_CLK_R]", + "[SD_CMD_R]", + "[SD_DATA0_R]", + "[SD_DATA1_R]", + "[SD_DATA2_R]", + "[SD_DATA3_R]"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 5afba0900449..0ff96ed4d15b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -15,6 +15,74 @@ }; &gpio { + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "[FOO]" = pin is muxed for peripheral FOO (not GPIO) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "[P3_SDA0]", + "[P5_SCL0]", + "[SDA1]", + "[SCL1]", + "[P7_GPIO_GCLK]", + "[CAM_CLK]", + "LAN_RUN", + "[P26_SPI_CE1_N]", + "[P24_SPI_CE0_N]", + "[P21_SPI_MISO]", + "[P19_SPI_MOSI]", + "[P23_SPI_SCLK]", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "[P8_TXD0]", + "[P10_RXD0]", + "STATUS_LED_N", + "P11_GPIO17", + "P12_GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "P13_GPIO21", + "P15_GPIO22", + "P16_GPIO23", + "P18_GPIO24", + "P22_GPIO25", + "NC", /* GPIO26 */ + "CAM_GPIO", + /* Binary number representing build/revision */ + "CONFIG0", + "CONFIG1", + "CONFIG2", + "CONFIG3", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "[PWM0_OUT]", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "[PWM1_OUT]", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "[SD_CLK_R]", + "[SD_CMD_R]", + "[SD_DATA0_R]", + "[SD_DATA1_R]", + "[SD_DATA2_R]", + "[SD_DATA3_R]"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 38f66aa244fe..0e04fc2eb65e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -23,6 +23,73 @@ }; &gpio { + /* + * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf + * RPI-BPLUS sheet 1 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "[FOO]" = pin is muxed for peripheral FOO (not GPIO) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "[ID_SD]", + "[ID_SC]", + "[P3_SDA1]", + "[P5_SCL1]", + "[P7_GPIO_GCLK]", + "P29_GPIO5", + "P31_GPIO6", + "[P26_SPI_CE1_N]", + "[P24_SPI_CE0_N]", + "[P21_SPI_MISO]", + "[P19_SPI_MOSI]", + "[P23_SPI_SCLK]", + "P23_GPIO12", + "P33_GPIO13", + /* Serial port */ + "[P8_TXD0]", + "[P10_RXD0]", + "P36_GPIO16", + "P11_GPIO17", + "P12_GPIO18", + "P35_GPIO19", + "P38_GPIO20", + "P40_GPIO21", + "P15_GPIO22", + "P16_GPIO23", + "P18_GPIO24", + "P22_GPIO25", + "P37_GPIO26", + "P13_GPIO27", + "[SDA0]", + "[SCL0]", + "NC", /* GPIO30 */ + "LAN_RUN", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "[PWM0_OUT]", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "ETHCLK", /* GPIO44 */ + "[PWM1_OUT]", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "[SD_CLK_R]", + "[SD_CMD_R]", + "[SD_DATA0_R]", + "[SD_DATA1_R]", + "[SD_DATA2_R]", + "[SD_DATA3_R]"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index 75e045aba7ce..6c91c9f0536c 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -16,6 +16,73 @@ }; &gpio { + /* + * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf + * RPI00022 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "[FOO]" = pin is muxed for peripheral FOO (not GPIO) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "[SDA0]", + "[SCL0]", + "[P3_SDA1]", + "[P5_SCL1]", + "[P7_GPIO_GCLK]", + "[CAM_CLK]", + "LAN_RUN", + "[P26_SPI_CE1_N]", + "[P24_SPI_CE0_N]", + "[P21_SPI_MISO]", + "[P19_SPI_MOSI]", + "[P23_SPI_SCLK]", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "[P8_TXD0]", + "[P10_RXD0]", + "STATUS_LED_N", + "P11_GPIO17", + "P12_GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "CAM_GPIO", + "P15_GPIO22", + "P16_GPIO23", + "P18_GPIO24", + "P22_GPIO25", + "NC", /* GPIO 26 */ + "P13_GPIO27", + "P5HEADER_P3_GPIO28", + "P5HEADER_P4_GPIO29", + "P5HEADER_P5_GPIO30", + "P5HEADER_P6_GPIO31", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "[PWM0_OUT]", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "[PWM1_OUT]", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "[SD_CLK_R]", + "[SD_CMD_R]", + "[SD_DATA0_R]", + "[SD_DATA1_R]", + "[SD_DATA2_R]", + "[SD_DATA3_R]"; + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 76a254b3219a..023239946826 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -16,6 +16,74 @@ }; &gpio { + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "[FOO]" = pin is muxed for peripheral FOO (not GPIO) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "[P3_SDA0]", + "[P5_SCL0]", + "[SDA1]", + "[SCL1]", + "[P7_GPIO_GCLK]", + "[CAM_CLK]", + "LAN_RUN", + "[P26_SPI_CE1_N]", + "[P24_SPI_CE0_N]", + "[P21_SPI_MISO]", + "[P19_SPI_MOSI]", + "[P23_SPI_SCLK]", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "[P8_TXD0]", + "[P10_RXD0]", + "STATUS_LED_N", + "P11_GPIO17", + "P12_GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "P13_GPIO21", + "P15_GPIO22", + "P16_GPIO23", + "P18_GPIO24", + "P22_GPIO25", + "NC", /* GPIO26 */ + "CAM_GPIO", + /* Binary number representing build/revision */ + "CONFIG0", + "CONFIG1", + "CONFIG2", + "CONFIG3", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "[PWM0_OUT]", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "[PWM1_OUT]", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "[SD_CLK_R]", + "[SD_CMD_R]", + "[SD_DATA0_R]", + "[SD_DATA1_R]", + "[SD_DATA2_R]", + "[SD_DATA3_R]"; + pinctrl-0 = <&gpioout &alt0>; }; -- 2.9.3