On Sun, Oct 23, 2016 at 06:31:07PM +0200, Jean-Francois Moine wrote: > On Tue, 4 Oct 2016 18:55:54 +0200 > Maxime Ripard <[email protected]> wrote: > > > On Tue, Oct 04, 2016 at 12:40:11PM +0200, Jean-Francois Moine wrote: > > > On Tue, 4 Oct 2016 11:46:14 +0200 > > > Mylène Josserand <[email protected]> wrote: > > > > > > > Add the case of a burst of 4 which is handled by the SoC. > > > > > > > > Signed-off-by: Mylène Josserand <[email protected]> > > > > --- > > > > drivers/dma/sun6i-dma.c | 2 ++ > > > > 1 file changed, 2 insertions(+) > > > > > > > > diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c > > > > index 8346199..0485204 100644 > > > > --- a/drivers/dma/sun6i-dma.c > > > > +++ b/drivers/dma/sun6i-dma.c > > > > @@ -240,6 +240,8 @@ static inline s8 convert_burst(u32 maxburst) > > > > switch (maxburst) { > > > > case 1: > > > > return 0; > > > > + case 4: > > > > + return 1; > > > > case 8: > > > > return 2; > > > > default: > > > > -- > > > > 2.9.3 > > > > > > This patch has already been rejected by Maxime in the threads > > > http://www.spinics.net/lists/dmaengine/msg08610.html > > > and > > > http://www.spinics.net/lists/dmaengine/msg08719.html > > > > > > I hope you will find the way he wants for this maxburst to be added. > > > > I was talking about something along these lines (not tested): > > I wonder why you don't submit this yourself.
I thought you were the one who cared. You asked for what I had in
mind, here it is.
> > -------8<---------
> > diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
> > index 83461994e418..573ac4608293 100644
> > --- a/drivers/dma/sun6i-dma.c
> > +++ b/drivers/dma/sun6i-dma.c
> > @@ -240,6 +240,8 @@ static inline s8 convert_burst(u32 maxburst)
> > switch (maxburst) {
> > case 1:
> > return 0;
> > + case 4:
> > + return 1;
> > case 8:
> > return 2;
> > default:
> > @@ -1110,11 +1112,19 @@ static int sun6i_dma_probe(struct platform_device
> > *pdev)
> > sdc->slave.dst_addr_widths =
> > BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
> >
> > BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
> >
> > BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
> > + sdc->slave.dst_bursts = BIT(1) | BIT(8);
> > + sdc->slave.src_bursts = BIT(1) | BIT(8);
> > sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
> > BIT(DMA_MEM_TO_DEV);
> > sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
> > sdc->slave.dev = &pdev->dev;
> >
> > + if (of_device_is_compatible(pdev->dev.of_node,
> > + "allwinner,sun8i-h3-dma")) {
> > + sdc->slave.dst_bursts |= BIT(4);
> > + sdc->slave.src_bursts |= BIT(4);
> > + }
> > +
> > sdc->pchans = devm_kcalloc(&pdev->dev, sdc->cfg->nr_max_channels,
> > sizeof(struct sun6i_pchan), GFP_KERNEL);
> > if (!sdc->pchans)
> > diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> > index cc535a478bae..f7bbec24bb58 100644
> > --- a/include/linux/dmaengine.h
> > +++ b/include/linux/dmaengine.h
> > @@ -673,6 +673,8 @@ struct dma_filter {
> > * each type of direction, the dma controller should fill (1 <<
> > * <TYPE>) and same should be checked by controller as well
> > * @max_burst: max burst capability per-transfer
> > + * @dst_bursts: bitfield of the available burst sizes for the destination
> > + * @src_bursts: bitfield of the available burst sizes for the source
>
> You did not define dst_bursts nor src_bursts.
>
> > * @residue_granularity: granularity of the transfer residue reported
> > * by tx_status
> > * @device_alloc_chan_resources: allocate resources and return the
> > @@ -800,6 +802,14 @@ struct dma_device {
> > static inline int dmaengine_slave_config(struct dma_chan *chan,
> > struct dma_slave_config *config)
> > {
> > + if (config->src_maxburst && config->device->src_bursts &&
> > + !(BIT(config->src_maxburst) & config->device->src_bursts))
>
> The maxburst may be as big as 4Kibytes, then, I am not sure that this
> code will work!
>
> > + return -EINVAL;
> > +
> > + if (config->dst_maxburst && config->device->dst_bursts &&
> > + !(BIT(config->dst_maxburst) & config->device->dst_bursts))
> > + return -EINVAL;
> > +
> > if (chan->device->device_config)
> > return chan->device->device_config(chan, config);
> > -------8<------------
>
> Yes, I know that the burst size is always a power of 2.
> The best way to check it would be to change the {src,dts}_maxburst to a
> bitmap of the possible bursts as 0x0d for 1,4 and 8 bytes. But this
> asks for a lot of changes...
To be honest, I'm not really a big fan of those tree wide changes
without any way to maintain compatibility. It ends up in a single,
huge patch if we want to maintain bisectability that just isn't
reviewable.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
