The denali->fwblks is set by detect_partition_feature(), but it is
not referenced from anywhere. That means the struct member fwblks
and the whole of detect_partition_feature() are unneeded.
The comment block implies this function is only for Intel platforms.
I found drivers/staging/spectra used to exist, but it was deleted by
commit be7f39c5ecf5 ("Staging: delete spectra driver") 5 years ago.
So, I guess nobody would need this function any more.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
drivers/mtd/nand/denali.c | 29 -----------------------------
drivers/mtd/nand/denali.h | 9 ---------
2 files changed, 38 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index d6f1b29..80d3e26 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -473,33 +473,6 @@ static void detect_max_banks(struct denali_nand_info
*denali)
denali->max_banks = 1 << (features & FEATURES__N_BANKS);
}
-static void detect_partition_feature(struct denali_nand_info *denali)
-{
- /*
- * For MRST platform, denali->fwblks represent the
- * number of blocks firmware is taken,
- * FW is in protect partition and MTD driver has no
- * permission to access it. So let driver know how many
- * blocks it can't touch.
- */
- if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
- if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) &
- PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) {
- denali->fwblks =
- ((ioread32(denali->flash_reg + MIN_MAX_BANK(1)) &
- MIN_MAX_BANK__MIN_VALUE) *
- denali->blksperchip)
- +
- (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) &
- MIN_BLK_ADDR__VALUE);
- } else {
- denali->fwblks = SPECTRA_START_BLOCK;
- }
- } else {
- denali->fwblks = SPECTRA_START_BLOCK;
- }
-}
-
static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
{
uint16_t status = PASS;
@@ -551,8 +524,6 @@ static uint16_t denali_nand_timing_set(struct
denali_nand_info *denali)
find_valid_banks(denali);
- detect_partition_feature(denali);
-
/*
* If the user specified to override the default timings
* with a specific ONFI mode, we apply those changes here.
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 0ce7344..7c0800d 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -383,14 +383,6 @@
#define CLK_X 5
#define CLK_MULTI 4
-/* spectraswconfig.h */
-#define CMD_DMA 0
-
-#define SPECTRA_PARTITION_ID 0
-/**** Block Table and Reserved Block Parameters *****/
-#define SPECTRA_START_BLOCK 3
-#define NUM_FREE_BLOCKS_GATE 30
-
/* KBV - Updated to LNW scratch register address */
#define SCRATCH_REG_ADDR CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR
#define SCRATCH_REG_SIZE 64
@@ -470,7 +462,6 @@ struct denali_nand_info {
int irq;
uint32_t devnum; /* represent how many nands connected */
- uint32_t fwblks; /* represent how many blocks FW used */
uint32_t totalblks;
uint32_t blksperchip;
uint32_t bbtskipbytes;
--
1.9.1
