There are two separate files describing the tsl2583 sysfs attributes.
Combine the two files into one. Updated the name of the sysfs attributes
to match the current ABI.
Signed-off-by: Brian Masney <masn...@onstation.org>
Suggested-by: Peter Meerwald-Stadler <pme...@pmeerw.net>
---
.../Documentation/light/sysfs-bus-iio-light-tsl2583 | 16 +++++++++++++++-
.../iio/Documentation/sysfs-bus-iio-light-tsl2583 | 20 --------------------
2 files changed, 15 insertions(+), 21 deletions(-)
delete mode 100644
drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
diff --git
a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
index 470f7ad..a2e1996 100644
--- a/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
+++ b/drivers/staging/iio/Documentation/light/sysfs-bus-iio-light-tsl2583
@@ -1,6 +1,20 @@
-What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate
+What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate
KernelVersion: 2.6.37
Contact: linux-...@vger.kernel.org
Description:
This property causes an internal calibration of the als gain
trim
value which is later used in calculating illuminance in lux.
+
+What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table
+KernelVersion: 2.6.37
+Contact: linux-...@vger.kernel.org
+Description:
+ This property gets/sets the table of coefficients
+ used in calculating illuminance in lux.
+
+What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target
+KernelVersion: 2.6.37
+Contact: linux-...@vger.kernel.org
+Description:
+ This property is the known externally illuminance (in lux).
+ It is used in the process of calibrating the device accuracy.
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
b/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
deleted file mode 100644
index 660781d..0000000
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light-tsl2583
+++ /dev/null
@@ -1,20 +0,0 @@
-What: /sys/bus/iio/devices/device[n]/lux_table
-KernelVersion: 2.6.37
-Contact: linux-...@vger.kernel.org
-Description:
- This property gets/sets the table of coefficients
- used in calculating illuminance in lux.
-
-What: /sys/bus/iio/devices/device[n]/illuminance0_calibrate
-KernelVersion: 2.6.37
-Contact: linux-...@vger.kernel.org
-Description:
- This property causes an internal calibration of the als gain
trim
- value which is later used in calculating illuminance in lux.
-
-What: /sys/bus/iio/devices/device[n]/illuminance0_input_target
-KernelVersion: 2.6.37
-Contact: linux-...@vger.kernel.org
-Description:
- This property is the known externally illuminance (in lux).
- It is used in the process of calibrating the device accuracy.
--
2.7.4
