Hi,

On Thu, Nov 17, 2016 at 05:16:56PM -0800, Laura Abbott wrote:
> 
> x86 has an option CONFIG_DEBUG_VIRTUAL to do additional checks
> on virt_to_phys calls. The goal is to catch users who are calling
> virt_to_phys on non-linear addresses immediately. This inclues callers
> using virt_to_phys on image addresses instead of __pa_symbol. As features
> such as CONFIG_VMAP_STACK get enabled for arm64, this becomes increasingly
> important. Add checks to catch bad virt_to_phys usage.
> 
> Signed-off-by: Laura Abbott <[email protected]>
> ---
> v3: Make use of __pa_symbol required via debug checks. It's a WARN for now but
> it can become a BUG after wider testing. __virt_to_phys is
> now for linear addresses only. Dropped the VM_BUG_ON from Catalin's suggested
> version from the nodebug version since having that in the nodebug version
> essentially made them the debug version. Changed to KERNEL_START/KERNEL_END
> for bounds checking. More comments.

I gave this a go with DEBUG_VIRTUAL && KASAN_INLINE selected, and the
kernel dies somewhere before bringing up earlycon. :(

I mentioned some possible reasons in a reply to pastch 5, and I have
some more comments below.

[...]

> -#define __virt_to_phys(x) ({                                         \
> +
> +
> +/*
> + * This is for translation from the standard linear map to physical 
> addresses.
> + * It is not to be used for kernel symbols.
> + */
> +#define __virt_to_phys_nodebug(x) ({                                 \
>       phys_addr_t __x = (phys_addr_t)(x);                             \
> -     __x & BIT(VA_BITS - 1) ? (__x & ~PAGE_OFFSET) + PHYS_OFFSET :   \
> -                              (__x - kimage_voffset); })
> +     ((__x & ~PAGE_OFFSET) + PHYS_OFFSET);                           \
> +})

Given the KASAN failure, and the strong possibility that there's even
more stuff lurking in common code, I think we should retain the logic to
handle kernel image addresses for the timebeing (as x86 does). Once
we've merged DEBUG_VIRTUAL, it will be easier to track those down.

Catalin, I think you suggested removing that logic; are you happy for it
to be restored?

See below for a refactoring that retains this logic.

[...]

> +/*
> + * This is for translation from a kernel image/symbol address to a
> + * physical address.
> + */
> +#define __pa_symbol_nodebug(x) ({                                    \
> +     phys_addr_t __x = (phys_addr_t)(x);                             \
> +     (__x - kimage_voffset);                                         \
> +})

We can avoid duplication here (and in physaddr.c) if we factor the logic
into helpers, e.g.

/*
 * The linear kernel range starts in the middle of the virtual adddress
 * space. Testing the top bit for the start of the region is a
 * sufficient check.
 */
#define __is_lm_address(addr)   (!!((addr) & BIT(VA_BITS - 1)))

#define __lm_to_phys(addr)      (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
#define __kimg_to_phys(addr)    ((addr) - kimage_voffset)

#define __virt_to_phys_nodebug(x) ({                                    \
        phys_addr_t __x = (phys_addr_t)(x);                             \
        __is_lm_address(__x) ? __lm_to_phys(__x) :                      \
                               __kimg_to_phys(__x);                     \
})

#define __pa_symbol_nodebug(x)  __kimg_to_phys((phys_addr_t)(x))

> +#ifdef CONFIG_DEBUG_VIRTUAL
> +extern unsigned long __virt_to_phys(unsigned long x);
> +extern unsigned long __phys_addr_symbol(unsigned long x);

It would be better for both of these to return phys_addr_t.

[...]

> diff --git a/arch/arm64/mm/physaddr.c b/arch/arm64/mm/physaddr.c
> new file mode 100644
> index 0000000..f8eb781
> --- /dev/null
> +++ b/arch/arm64/mm/physaddr.c
> @@ -0,0 +1,39 @@
> +#include <linux/mm.h>
> +
> +#include <asm/memory.h>

We also need:

#include <linux/bug.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/mmdebug.h>

> +unsigned long __virt_to_phys(unsigned long x)
> +{
> +     phys_addr_t __x = (phys_addr_t)x;
> +
> +     if (__x & BIT(VA_BITS - 1)) {
> +             /*
> +              * The linear kernel range starts in the middle of the virtual
> +              * adddress space. Testing the top bit for the start of the
> +              * region is a sufficient check.
> +              */
> +             return (__x & ~PAGE_OFFSET) + PHYS_OFFSET;
> +     } else {
> +             /*
> +              * __virt_to_phys should not be used on symbol addresses.
> +              * This should be changed to a BUG once all basic bad uses have
> +              * been cleaned up.
> +              */
> +             WARN(1, "Do not use virt_to_phys on symbol addresses");
> +             return __phys_addr_symbol(x);
> +     }
> +}
> +EXPORT_SYMBOL(__virt_to_phys);

I think this would be better something like:

phys_addr_t __virt_to_phys(unsigned long x)
{
        WARN(!__is_lm_address(x),
             "virt_to_phys() used for non-linear address: %pK\n",
             (void*)x);
        
        return __virt_to_phys_nodebug(x);
}
EXPORT_SYMBOL(__virt_to_phys);

> +
> +unsigned long __phys_addr_symbol(unsigned long x)
> +{
> +     phys_addr_t __x = (phys_addr_t)x;
> +
> +     /*
> +      * This is bounds checking against the kernel image only.
> +      * __pa_symbol should only be used on kernel symbol addresses.
> +      */
> +     VIRTUAL_BUG_ON(x < (unsigned long) KERNEL_START || x > (unsigned long) 
> KERNEL_END);
> +     return (__x - kimage_voffset);
> +}
> +EXPORT_SYMBOL(__phys_addr_symbol);

Similarly:

phys_addr_t __phys_addr_symbol(unsigned long x)
{
        /*
         * This is bounds checking against the kernel image only.
         * __pa_symbol should only be used on kernel symbol addresses.
         */
        VIRTUAL_BUG_ON(x < (unsigned long) KERNEL_START ||
                       x > (unsigned long) KERNEL_END);

        return __pa_symbol_nodebug(x);
}
EXPORT_SYMBOL(__phys_addr_symbol);

Thanks,
Mark.

Reply via email to