On Tue, Nov 29, 2016 at 01:43:59PM -0500, Prarit Bhargava wrote:
> When removing and adding cpu 0 on a system with GHES NMI the following stack
> trace is seen when re-adding the cpu:
>
> WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:1349 setup_local_APIC+
> Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 nfs fscache coretemp intel_ra
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc5+ #59
> Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.01.00.0
> ffffffff81c03e78 ffffffff81337905 0000000000000000 0000000000000000
> ffffffff81c03eb8 ffffffff8107d9c1 00000545810aac4a 0000000000000000
> 00000000000000f0 0000000000000000 000081cb6440f1d0 0000000000000001
> Call Trace:
> [<ffffffff81337905>] dump_stack+0x63/0x8e
> [<ffffffff8107d9c1>] __warn+0xd1/0xf0
> [<ffffffff8107daad>] warn_slowpath_null+0x1d/0x20
> [<ffffffff810522b5>] setup_local_APIC+0x275/0x370
> [<ffffffff810523be>] apic_ap_setup+0xe/0x20
> [<ffffffff8104f5a8>] start_secondary+0x48/0x180
> [<ffffffff81d89aa0>] ? set_init_arg+0x55/0x55
> [<ffffffff81d89120>] ? early_idt_handler_array+0x120/0x120
> [<ffffffff81d895d6>] ? x86_64_start_reservations+0x2a/0x2c
> [<ffffffff81d89715>] ? x86_64_start_kernel+0x13d/0x14c
> ---[ end trace 7b6555b6343ef9ee ]---
Please remove all hex numbers from the splat - they're useless in the
commit message.
> During the cpu bringup, wakeup_cpu_via_init_nmi() is called and issues an
> NMI on CPU 0. The GHES NMI handler, ghes_notify_nmi() runs the
> ghes_proc_irq_work work queue which ends up setting IRQ_WORK_VECTOR
> (0xf6). The "faulty" IR line set at arch/x86/kernel/apic/apic.c:1349 is also
> 0xf6 (specifically APIC IRR for irqs 255 to 224 is 0x400000) which confirms
> that something has set the IRQ_WORK_VECTOR line prior to the APIC being
> initialized.
>
> Commit 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler")
> incorrectly modified the behavior such that the handler returns
> NMI_HANDLED only if an error was processed, and incorrectly runs the ghes
> work queue for every NMI.
>
> This patch modifies the ghes_proc_irq_work() to run as it did prior to
> 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler") by
> properly returning NMI_HANDLED and only calling the work queue if
> NMI_HANDLED has been set.
>
> Fixes: 2383844d4850 ("GHES: Elliminate double-loop in the NMI handler")
> Signed-off-by: Prarit Bhargava <pra...@redhat.com>
> Cc: Borislav Petkov <b...@suse.de>
> Cc: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
> Cc: Len Brown <l...@kernel.org>
> Cc: Paul Gortmaker <paul.gortma...@windriver.com>
> Cc: Tyler Baicar <tbai...@codeaurora.org>
> Cc: Punit Agrawal <punit.agra...@arm.com>
> Cc: Don Zickus <dzic...@redhat.com>
> Cc: linux-a...@vger.kernel.org
> ---
> drivers/acpi/apei/ghes.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index 0d099a24f776..39c45efbcb3d 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -858,17 +858,18 @@ static int ghes_notify_nmi(unsigned int cmd, struct
> pt_regs *regs)
> if (sev >= GHES_SEV_PANIC)
> __ghes_panic(ghes);
>
> + ret = NMI_HANDLED;
> +
Make that more explicit:
if (ghes_read_estatus(ghes, 1)) {
ghes_clear_estatus(ghes);
continue;
} else {
ret = NMI_HANDLED;
}
> if (!(ghes->flags & GHES_TO_CLEAR))
> continue;
>
> __process_error(ghes);
> ghes_clear_estatus(ghes);
> -
> - ret = NMI_HANDLED;
> }
>
> #ifdef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG
> - irq_work_queue(&ghes_proc_irq_work);
> + if (ret == NMI_HANDLED)
> + irq_work_queue(&ghes_proc_irq_work);
> #endif
> atomic_dec(&ghes_in_nmi);
> return ret;
> --
Otherwise looks ok,
thanks.
--
Regards/Gruss,
Boris.
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284
(AG Nürnberg)
--
