Hi Russell,
On 11/30/2016 04:21 AM, Russell King - ARM Linux wrote:
> On Tue, Nov 29, 2016 at 05:47:12PM -0600, Grygorii Strashko wrote:
>> 2) Should these function be called for each processed irq?
>>
>>
>> HW IRQ:
>> switch (IRQ mode)
>> ...
>> while (irq = get_pending_irq()) {
>> ...
>> irq_enter()
>> handle(irq) - execute hw_irq_hadler
>> irq_exit()
>> }
>> ...
>> switch
>
> We tend to do (2) as a general rule, which isn't much different from what
> other architectures do - even if they have a method to directly enter
> through vectors (eg, x86) the effect of two pending interrupts is that one
> will run after each other, and there will be an intervening exit -> entry.
>
> In the case of ARM CPUs, if the interrupt signal is active, you vector
> back to the interrupt handler as soon as you exit back to the parent
> context without executing any parent context instructions.
>
> So, we have the choice of going through all the IRQ entry code, processing
> one interrupt, and returning only to then re-vector back through the IRQ
> entry code, or we can process all the pending IRQs that we can see at that
> time.
>
> The former method wastes all the CPU cycles getting from the parent context
> to the IRQ context for each and every interrupt.
>
Thanks a lot for your detailed explanation.
When I've asked this question my intention was to understand possibility of
calling
irq_enter()/irq_exit() only once for the case (2), like:
HW IRQ:
switch (IRQ mode)
...
irq_enter()
while (irq = get_pending_irq()) {
...
handle(irq) - execute hw_irq_hadler
}
irq_exit()
...
switch
--
regards,
-grygorii
