Add neta nodes for network support both in device tree for the SoC and
the board.

Signed-off-by: Gregory CLEMENT <gregory.clem...@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 23 +++++++++++++++++++-
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 23 +++++++++++++++++++-
 2 files changed, 46 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts 
b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6aaa4..c8b82e4145de 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -81,3 +81,26 @@
 &pcie0 {
        status = "okay";
 };
+
+&mdio {
+       status = "okay";
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
+&eth0 {
+       phy-mode = "rgmii-id";
+       phy = <&phy0>;
+       status = "okay";
+};
+
+&eth1 {
+       phy-mode = "rgmii-id";
+       phy = <&phy1>;
+       status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi 
b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index e9bd58793464..3b8eb45bdc76 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -140,6 +140,29 @@
                                };
                        };
 
+                       eth0: ethernet@30000 {
+                                  compatible = "marvell,armada-3700-neta";
+                                  reg = <0x30000 0x4000>;
+                                  interrupts = <GIC_SPI 42 
IRQ_TYPE_LEVEL_HIGH>;
+                                  clocks = <&sb_periph_clk 8>;
+                                  status = "disabled";
+                       };
+
+                       mdio: mdio@32004 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "marvell,orion-mdio";
+                               reg = <0x32004 0x4>;
+                       };
+
+                       eth1: ethernet@40000 {
+                               compatible = "marvell,armada-3700-neta";
+                               reg = <0x40000 0x4000>;
+                               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&sb_periph_clk 7>;
+                               status = "disabled";
+                       };
+
                        usb3: usb@58000 {
                                compatible = "marvell,armada3700-xhci",
                                "generic-xhci";
-- 
git-series 0.8.10

Reply via email to