This patch adds dt-binding documentation for zx2967 family thermal sensor.
Signed-off-by: Baoyou Xie <baoyou....@linaro.org>
---
.../devicetree/bindings/thermal/zx2967-thermal.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
new file mode 100644
index 0000000..2633964
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
@@ -0,0 +1,22 @@
+* ZTE zx2967 family Thermal
+
+Required Properties:
+- compatible: should be one of the following.
+ * zte,zx2967-thermal
+ * zte,zx296718-thermal
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- clock-names: "tempsensor_gate" for the topcrm clock.
+ "tempsensor_pclk" for the apb clock.
+- #thermal-sensor-cells: must be 0.
+
+Example:
+
+ tempsensor: tempsensor@148a000 {
+ compatible = "zte,zx2967-thermal";
+ reg = <0x0148a000 0x20>;
+ clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>;
+ clock-names = "tempsensor_gate", "tempsensor_pclk";
+ #thermal-sensor-cells = <0>;
+ };
--
2.7.4
