Hello, Hopefully the last resend. I double checked everything this time :-).
This patch series is adding to important features to the new Atmel NAND controller driver: 1/ automatic SMC timings configuration based on information retrieved during NAND detection 2/ proper ->suspend()/->resume(). Timings are properly restored when resuming the system This series depends on [1] and [2]. Regards, Boris [1]https://www.spinics.net/lists/arm-kernel/msg563780.html [2]https://www.mail-archive.com/[email protected]/msg1337235.html Boris Brezillon (3): mtd: nand: Pass the CS line to ->setup_data_interface() mtd: nand: atmel: Add ->setup_data_interface() hooks mtd: nand: atmel: Add PM ops drivers/mtd/nand/atmel/nand-controller.c | 351 ++++++++++++++++++++++++++++++- drivers/mtd/nand/mxc_nand.c | 12 +- drivers/mtd/nand/nand_base.c | 22 +- drivers/mtd/nand/s3c2410.c | 5 +- drivers/mtd/nand/sunxi_nand.c | 7 +- drivers/mtd/nand/tango_nand.c | 7 +- include/linux/mtd/nand.h | 12 +- 7 files changed, 380 insertions(+), 36 deletions(-) -- 2.7.4
