Hi,

On 2017년 03월 13일 17:40, Hans de Goede wrote:
> With the new more strict ACPI gpio code the dsdt's IoRestriction
> flags are honored on gpiod_get, but in some dsdt's it is wrong,
> so explicitly call gpiod_direction_input on the id gpio if
> necessary.
> 
> This fixes the following errors when the int3496 code is used
> together with the new more strict ACPI gpio code:
> 
> [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to 
> flag a GPIO set as output for IRQ
> [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ
> [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) 
> on irqchip chv-gpio
> [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: 
> -22
> [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22
> 
> Cc: Andy Shevchenko <[email protected]>
> Signed-off-by: Hans de Goede <[email protected]>
> ---
> Changes in v2:
> -Warn about firmware bug when the dsdt's IoRestriction does not allow input
> ---
>  drivers/extcon/extcon-intel-int3496.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/extcon/extcon-intel-int3496.c 
> b/drivers/extcon/extcon-intel-int3496.c
> index b8ac947..18801eb 100644
> --- a/drivers/extcon/extcon-intel-int3496.c
> +++ b/drivers/extcon/extcon-intel-int3496.c
> @@ -113,6 +113,10 @@ static int int3496_probe(struct platform_device *pdev)
>               dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
>               return ret;
>       }

Need to add one blank line at here.

> +     if (gpiod_get_direction(data->gpio_usb_id) != GPIOF_DIR_IN) {
> +             dev_warn(dev, "firmware bug USB ID GPIO not in input mode, 
> fixing\n");

The length of warning comment is over 80 char.
We need to reduce the length of comment.

I modify the comment as following: If you ok, I'll apply it. 
        "ID pin isn't in input mode due to firmware bug"

Or if you make new comment under 80 char, please send v3 patch.

> +             gpiod_direction_input(data->gpio_usb_id);
> +     }
>  
>       data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
>       if (data->usb_id_irq < 0) {
> 

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

Reply via email to