The CPU port of the BCM53125 is configured with RGMII (no delays) but
this should actually be RGMII with transmit delay (rgmii-txid) because
STMMAC takes care of inserting the transmitter delay. This fixes
occasional packet loss encountered.
Fixes: d7b9eaff5f0c ("ARM: dts: sun7i: Add BCM53125 switch nodes to the
lamobo-r1 board")
Reported-by: Hartmut Knaack <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
---
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 72ec0d5ae052..bbf1c8cbaac6 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -167,7 +167,7 @@
reg = <8>;
label = "cpu";
ethernet = <&gmac>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-txid";
fixed-link {
speed = <1000>;
full-duplex;
--
2.9.3
