From: Yannick Fertre <[email protected]> This adds documentation of device tree bindings for the STM32 IWDG (Independent WatchDoG).
Change-Id: Idadacc806d00205fe9af2e8606af229b4b760558 Signed-off-by: Yannick Fertre <[email protected]> Reviewed-on: https://gerrit.st.com/45217 Reviewed-by: Yannick FERTRE <[email protected]> Tested-by: Yannick FERTRE <[email protected]> Reviewed-by: Ludovic BARRE <[email protected]> --- .../devicetree/bindings/watchdog/st,stm32-iwdg.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt new file mode 100644 index 0000000..9c6936b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt @@ -0,0 +1,15 @@ +STM32 Independent WatchDoG (IWDG) +--------------------------------- + +Required properties: +- compatible: "st,stm32-iwdg". +- reg: physical base address and length of the registers set for the device; +- clocks: Must contain a single entry describing the clock input + +Example: + +iwdg@40003000 { + compatible = "st,stm32-iwdg"; + reg = <0x40003000 0x400>; + clocks = <&clk_lsi>; +}; -- 1.9.1
