Quoting Neil Armstrong (2017-03-22 02:14:40)
> On 03/22/2017 12:31 AM, Michael Turquette wrote:
> > Hi Neil,
> >
> > Quoting Neil Armstrong (2017-03-09 04:53:46)
> >> The Mali is clocked by two identical clock paths behind a glitch free mux
> >> to safely change frequency while running.
> >>
> >> The two "mali_0" and "mali_1" clocks are composed of a mux, divider and
> >> gate.
> >> Expose these two clocks trees using generic clocks.
> >> Finally the glitch free mux is added as "mali" clock.
> >>
> >> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> >> ---
> >> drivers/clk/meson/gxbb.c | 139
> >> +++++++++++++++++++++++++++++++++++++++++++++++
> >> 1 file changed, 139 insertions(+)
> >>
> >> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
> >> index 5059c7b..d9f7fef 100644
> >> --- a/drivers/clk/meson/gxbb.c
> >> +++ b/drivers/clk/meson/gxbb.c
> >> @@ -634,6 +634,131 @@
> >> },
> >> };
> >>
> >> +/*
> >> + * The MALI IP is clocked by two identical clocks (mali_0 and mali_1)
> >> + * muxed by a glitch-free switch.
> >> + */
> >> +
> >> +static u32 mux_table_mali_0_1[] = {0, 1, 2, 3, 4, 5, 6, 7};
> >> +static const char *gxbb_mali_0_1_parent_names[] = {
> >> + "xtal", "gp0_pll", "mpll2", "mpll1", "fclk_div7",
> >> + "fclk_div4", "fclk_div3", "fclk_div5"
> >> +};
> >> +
> >> +static struct clk_mux gxbb_mali_0_sel = {
> >> + .reg = (void *)HHI_MALI_CLK_CNTL,
> >> + .mask = 0x7,
> >> + .shift = 9,
> >> + .table = mux_table_mali_0_1,
> >> + .lock = &clk_lock,
> >> + .hw.init = &(struct clk_init_data){
> >> + .name = "mali_0_sel",
> >> + .ops = &clk_mux_ops,
> >> + /*
> >> + * bits 10:9 selects from 8 possible parents:
> >> + * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
> >> + * fclk_div4, fclk_div3, fclk_div5
> >> + */
> >> + .parent_names = gxbb_mali_0_1_parent_names,
> >> + .num_parents = 8,
> >> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
> >
> > Are all of these CLK_IGNORE_UNUSED flags necessary? If so, why? I'm just
> > wondering if this is yet another display-related use case where a
> > hand-off mechanism would work better?
>
> Hi,
>
> I'm just precocious about how these clocks will be handled, since the Mali
> driver
> is out of tree, I'm not sure about how they will be handled at all.
Sure, but out of tree driver users can always use the clk_disable_unused
bootarg if needed.
>
> But I can test and remove these if we consider my out-of-tree driver platform
> code as reference.
Great, thanks.
Best regards,
Mike
>
> Neil
>
> >
> > Thanks,
> > Mike
> >
> >> + },
> >> +};
> >> +
> >> +static struct clk_divider gxbb_mali_0_div = {
> >> + .reg = (void *)HHI_MALI_CLK_CNTL,
> >> + .shift = 0,
> >> + .width = 7,
> >> + .lock = &clk_lock,
> >> + .hw.init = &(struct clk_init_data){
> >> + .name = "mali_0_div",
> >> + .ops = &clk_divider_ops,
> >> + .parent_names = (const char *[]){ "mali_0_sel" },
> >> + .num_parents = 1,
> >> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
> >> + },
> >> +};
> >> +
> >> +static struct clk_gate gxbb_mali_0 = {
> >> + .reg = (void *)HHI_MALI_CLK_CNTL,
> >> + .bit_idx = 8,
> >> + .lock = &clk_lock,
> >> + .hw.init = &(struct clk_init_data){
> >> + .name = "mali_0",
> >> + .ops = &clk_gate_ops,
> >> + .parent_names = (const char *[]){ "mali_0_div" },
> >> + .num_parents = 1,
> >> + .flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),
> >> + },
> >> +};
> >> +
> >> +static struct clk_mux gxbb_mali_1_sel = {
> >> + .reg = (void *)HHI_MALI_CLK_CNTL,
> >> + .mask = 0x7,
> >> + .shift = 25,
> >> + .table = mux_table_mali_0_1,
> >> + .lock = &clk_lock,
> >> + .hw.init = &(struct clk_init_data){
> >> + .name = "mali_1_sel",
> >> + .ops = &clk_mux_ops,
> >> + /*
> >> + * bits 10:9 selects from 8 possible parents:
> >> + * xtal, gp0_pll, mpll2, mpll1, fclk_div7,
> >> + * fclk_div4, fclk_div3, fclk_div5
> >> + */
> >> + .parent_names = gxbb_mali_0_1_parent_names,
> >> + .num_parents = 8,
> >> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
> >> + },
> >> +};
> >> +
> >> +static struct clk_divider gxbb_mali_1_div = {
> >> + .reg = (void *)HHI_MALI_CLK_CNTL,
> >> + .shift = 16,
> >> + .width = 7,
> >> + .lock = &clk_lock,
> >> + .hw.init = &(struct clk_init_data){
> >> + .name = "mali_1_div",
> >> + .ops = &clk_divider_ops,
> >> + .parent_names = (const char *[]){ "mali_1_sel" },
> >> + .num_parents = 1,
> >> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
> >> + },
> >> +};
> >> +
> >> +static struct clk_gate gxbb_mali_1 = {
> >> + .reg = (void *)HHI_MALI_CLK_CNTL,
> >> + .bit_idx = 24,
> >> + .lock = &clk_lock,
> >> + .hw.init = &(struct clk_init_data){
> >> + .name = "mali_1",
> >> + .ops = &clk_gate_ops,
> >> + .parent_names = (const char *[]){ "mali_1_div" },
> >> + .num_parents = 1,
> >> + .flags = (CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED),
> >> + },
> >> +};
> >> +
> >> +static u32 mux_table_mali[] = {0, 1};
> >> +static const char *gxbb_mali_parent_names[] = {
> >> + "mali_0", "mali_1"
> >> +};
> >> +
> >> +static struct clk_mux gxbb_mali = {
> >> + .reg = (void *)HHI_MALI_CLK_CNTL,
> >> + .mask = 1,
> >> + .shift = 31,
> >> + .table = mux_table_mali,
> >> + .lock = &clk_lock,
> >> + .hw.init = &(struct clk_init_data){
> >> + .name = "mali",
> >> + .ops = &clk_mux_ops,
> >> + .parent_names = gxbb_mali_parent_names,
> >> + .num_parents = 2,
> >> + .flags = (CLK_SET_RATE_NO_REPARENT | CLK_IGNORE_UNUSED),
> >> + },
> >> +};
> >> +
> >> /* Everything Else (EE) domain gates */
> >> static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
> >> static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
> >> @@ -827,6 +952,13 @@
> >> [CLKID_SAR_ADC_CLK] = &gxbb_sar_adc_clk.hw,
> >> [CLKID_SAR_ADC_SEL] = &gxbb_sar_adc_clk_sel.hw,
> >> [CLKID_SAR_ADC_DIV] = &gxbb_sar_adc_clk_div.hw,
> >> + [CLKID_MALI_0_SEL] = &gxbb_mali_0_sel.hw,
> >> + [CLKID_MALI_0_DIV] = &gxbb_mali_0_div.hw,
> >> + [CLKID_MALI_0] = &gxbb_mali_0.hw,
> >> + [CLKID_MALI_1_SEL] = &gxbb_mali_1_sel.hw,
> >> + [CLKID_MALI_1_DIV] = &gxbb_mali_1_div.hw,
> >> + [CLKID_MALI_1] = &gxbb_mali_1.hw,
> >> + [CLKID_MALI] = &gxbb_mali.hw,
> >> },
> >> .num = NR_CLKS,
> >> };
> >> @@ -930,16 +1062,23 @@
> >> &gxbb_emmc_b,
> >> &gxbb_emmc_c,
> >> &gxbb_sar_adc_clk,
> >> + &gxbb_mali_0,
> >> + &gxbb_mali_1,
> >> };
> >>
> >> static struct clk_mux *const gxbb_clk_muxes[] = {
> >> &gxbb_mpeg_clk_sel,
> >> &gxbb_sar_adc_clk_sel,
> >> + &gxbb_mali_0_sel,
> >> + &gxbb_mali_1_sel,
> >> + &gxbb_mali,
> >> };
> >>
> >> static struct clk_divider *const gxbb_clk_dividers[] = {
> >> &gxbb_mpeg_clk_div,
> >> &gxbb_sar_adc_clk_div,
> >> + &gxbb_mali_0_div,
> >> + &gxbb_mali_1_div,
> >> };
> >>
> >> static int gxbb_clkc_probe(struct platform_device *pdev)
> >> --
> >> 1.9.1
> >>
>
