Le 12/04/2017 à 09:05, Quentin Schulz a écrit : > The SPI controller configuration during the init can be reused, for the > resume function for example. > > Let's move this configuration to a separate function. > > Signed-off-by: Quentin Schulz <[email protected]>
Okay: Acked-by: Nicolas Ferre <[email protected]> > --- > drivers/spi/spi-atmel.c | 35 +++++++++++++++++++++-------------- > 1 file changed, 21 insertions(+), 14 deletions(-) > > diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c > index 0e7712b..247d920 100644 > --- a/drivers/spi/spi-atmel.c > +++ b/drivers/spi/spi-atmel.c > @@ -1464,6 +1464,25 @@ static int atmel_spi_gpio_cs(struct platform_device > *pdev) > return 0; > } > > +static void atmel_spi_init(struct atmel_spi *as) > +{ > + spi_writel(as, CR, SPI_BIT(SWRST)); > + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ > + if (as->caps.has_wdrbt) { > + spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS) > + | SPI_BIT(MSTR)); > + } else { > + spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); > + } > + > + if (as->use_pdc) > + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); > + spi_writel(as, CR, SPI_BIT(SPIEN)); > + > + if (as->fifo_size) > + spi_writel(as, CR, SPI_BIT(FIFOEN)); > +} > + > static int atmel_spi_probe(struct platform_device *pdev) > { > struct resource *regs; > @@ -1572,26 +1591,14 @@ static int atmel_spi_probe(struct platform_device > *pdev) > > as->spi_clk = clk_get_rate(clk); > > - spi_writel(as, CR, SPI_BIT(SWRST)); > - spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ > - if (as->caps.has_wdrbt) { > - spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS) > - | SPI_BIT(MSTR)); > - } else { > - spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); > - } > - > - if (as->use_pdc) > - spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); > - spi_writel(as, CR, SPI_BIT(SPIEN)); > - > as->fifo_size = 0; > if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size", > &as->fifo_size)) { > dev_info(&pdev->dev, "Using FIFO (%u data)\n", as->fifo_size); > - spi_writel(as, CR, SPI_BIT(FIFOEN)); > } > > + atmel_spi_init(as); > + > pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT); > pm_runtime_use_autosuspend(&pdev->dev); > pm_runtime_set_active(&pdev->dev); > -- Nicolas Ferre
