On 4/25/2017 12:50 AM, Eric Anholt wrote:
Cygnus has a single amac controller connected to the B53 switch with 2
PHYs. On the BCM911360_EP platform, those two PHYs are connected to
the external ethernet jacks.
Signed-off-by: Eric Anholt <e...@anholt.net>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 60 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++++
2 files changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi
b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 009f1346b817..318899df9972 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
[...]
@@ -295,6 +345,16 @@
status = "disabled";
};
+ eth0: enet@18042000 {
Oh, and this one should be named "ethernet", according to the DT spec.
+ compatible = "brcm,amac";
+ reg = <0x18042000 0x1000>,
+ <0x18110000 0x1000>;
+ reg-names = "amac_base", "idm_base";
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ max-speed = <1000>;
+ status = "disabled";
+ };
+
nand: nand@18046000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x18046000 0x600>, <0xf8105408 0x600>,
[...]
MBR, Sergei
