Add thermal support via the ns-thermal driver and create a single thermal zone for the entire SoC.
Signed-off-by: Jon Mason <[email protected]> --- arch/arm/boot/dts/bcm-nsp.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 832795b..be6fcfb 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -383,6 +383,12 @@ <0x3f408 0x04>; }; + thermal: thermal@3f2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x3f2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + sata_phy: sata_phy@40100 { compatible = "brcm,iproc-nsp-sata-phy"; reg = <0x40100 0x340>; @@ -533,4 +539,24 @@ brcm,pcie-msi-inten; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; }; -- 2.7.4
