[PATCH v2 8/8] ARM: sun8i: a83t: Switch to CCU device tree binding macros

[Chen-Yu Tsai]

Now that the CCU device tree binding headers have been merged, we can
use the properly named macros in the device tree, instead of raw
numbers.

Signed-off-by: Chen-Yu Tsai <w...@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi 
b/arch/arm/boot/dts/sun8i-a83t.dtsi
index e12dd7170b8f..050d3e347740 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -44,6 +44,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
 / {
        interrupt-parent = <&gic>;
        #address-cells = <1>;
@@ -178,7 +181,7 @@
                                     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
                        reg = <0x01c20800 0x400>;
-                       clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+                       clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
                        clock-names = "apb", "hosc", "losc";
                        gpio-controller;
                        interrupt-controller;
@@ -225,8 +228,8 @@
                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&ccu 53>;
-                       resets = <&ccu 40>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
                        status = "disabled";
                };
 
-- 
2.11.0