4.10-stable review patch. If anyone has any objections, please let me know.
------------------ From: Nicholas Bellinger <[email protected]> commit a71a5dc7f833943998e97ca8fa6a4c708a0ed1a9 upstream. Following the bugfix for handling non SAM_STAT_GOOD COMPARE_AND_WRITE status during COMMIT phase in commit 9b2792c3da1, the same bug exists for the READ phase as well. This would manifest first as a lost SCSI response, and eventual hung task during fabric driver logout or re-login, as existing shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref to reach zero. To address this bug, compare_and_write_callback() has been changed to set post_ret = 1 and return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE as necessary to signal failure status. Reported-by: Bill Borsari <[email protected]> Cc: Bill Borsari <[email protected]> Tested-by: Gary Guo <[email protected]> Cc: Gary Guo <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/target/target_core_sbc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/target/target_core_sbc.c +++ b/drivers/target/target_core_sbc.c @@ -507,8 +507,11 @@ static sense_reason_t compare_and_write_ * been failed with a non-zero SCSI status. */ if (cmd->scsi_status) { - pr_err("compare_and_write_callback: non zero scsi_status:" + pr_debug("compare_and_write_callback: non zero scsi_status:" " 0x%02x\n", cmd->scsi_status); + *post_ret = 1; + if (cmd->scsi_status == SAM_STAT_CHECK_CONDITION) + ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; goto out; }
