On Thu, May 18, 2017 at 3:31 PM, Jan Kiszka <jan.kis...@siemens.com> wrote: > On 2017-05-18 13:07, Andy Shevchenko wrote: >> On Wed, May 17, 2017 at 6:28 PM, Jan Kiszka <jan.kis...@siemens.com> wrote: >>> This is an upstream port of an IIO driver for the TI ADC108S102 and >>> ADC128S102. The former can be found on the Intel Galileo Gen2 and the >>> Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is >>> included. >>> >>> Due to the lack of regulators under ACPI, we hard-code the voltage >>> provided to the VA pin of the ADC to 5 V, the value used on Galileo and >>> IOT2000. For DT usage, the regulator "vref-supply" provides this >>> information. Note that DT usage has not been tested. >>> >>> Original author: Bogdan Pricop <bogdan.pri...@emutex.com> >>> Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel: >>> Todor Minchev <to...@minchev.co.uk>. >>> >>> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com> >> >> It seems you missed my tag. >> >> FWIW: >> Reviewed-by: Andy Shevchenko <andy.shevche...@gmail.com> > > As the code changed again, I left it out. Thanks for confirming it that > it still applies!
Yes, it does with the same remark about regulator API usage. -- With Best Regards, Andy Shevchenko
