Hi,
 
 On mer., mai 31 2017, Gregory CLEMENT <[email protected]> 
wrote:

> The new binding for the system controller on ap806 moved the clock into a
> subnode. This preliminary step will allow to add gpio and pinctrl
> subnodes
>
> Reviewed-by: Thomas Petazzoni <[email protected]>
> Signed-off-by: Gregory CLEMENT <[email protected]>


Applied on mvebu/dt64

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 19 +++++++++++--------
>  1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi 
> b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 0c25ec62a2a3..205037e3e7dc 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -193,7 +193,7 @@
>                               #size-cells = <0>;
>                               cell-index = <0>;
>                               interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> -                             clocks = <&ap_syscon 3>;
> +                             clocks = <&ap_clk 3>;
>                               status = "disabled";
>                       };
>  
> @@ -204,7 +204,7 @@
>                               #size-cells = <0>;
>                               interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>                               timeout-ms = <1000>;
> -                             clocks = <&ap_syscon 3>;
> +                             clocks = <&ap_clk 3>;
>                               status = "disabled";
>                       };
>  
> @@ -214,7 +214,7 @@
>                               reg-shift = <2>;
>                               interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
>                               reg-io-width = <1>;
> -                             clocks = <&ap_syscon 3>;
> +                             clocks = <&ap_clk 3>;
>                               status = "disabled";
>                       };
>  
> @@ -224,7 +224,7 @@
>                               reg-shift = <2>;
>                               interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
>                               reg-io-width = <1>;
> -                             clocks = <&ap_syscon 3>;
> +                             clocks = <&ap_clk 3>;
>                               status = "disabled";
>  
>                       };
> @@ -234,17 +234,20 @@
>                               reg = <0x6e0000 0x300>;
>                               interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>                               clock-names = "core";
> -                             clocks = <&ap_syscon 4>;
> +                             clocks = <&ap_clk 4>;
>                               dma-coherent;
>                               marvell,xenon-phy-slow-mode;
>                               status = "disabled";
>                       };
>  
>                       ap_syscon: system-controller@6f4000 {
> -                             compatible = "marvell,ap806-system-controller",
> -                                          "syscon";
> -                             #clock-cells = <1>;
> +                             compatible = "syscon", "simple-mfd";
>                               reg = <0x6f4000 0x1000>;
> +
> +                             ap_clk: clock {
> +                                     compatible = "marvell,ap806-clock";
> +                                     #clock-cells = <1>;
> +                             };
>                       };
>               };
>       };
> -- 
> git-series 0.9.1
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Reply via email to