Linus recently broke the printk without KERN_CONT behavior.
Fix it for uvesafb.
While there, convert printk(KERN_<LEVEL> to pr_<level>.
Add pr_fmt and remove the embedded prefixes.
Miscellanea:
o Coalesce formats and realign arguments
o Add a missing space to a format when coalescing.
Signed-off-by: Joe Perches <j...@perches.com>
---
drivers/video/fbdev/uvesafb.c | 148 ++++++++++++++++++------------------------
1 file changed, 62 insertions(+), 86 deletions(-)
diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 98af9e02959b..dc0e8d90d9cc 100644
--- a/drivers/video/fbdev/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
@@ -5,6 +5,9 @@
* Loosely based upon the vesafb driver.
*
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -149,8 +152,8 @@ static int uvesafb_exec(struct uvesafb_ktask *task)
* allowed by connector.
*/
if (sizeof(*m) + len > CONNECTOR_MAX_MSG_SIZE) {
- printk(KERN_WARNING "uvesafb: message too long (%d), "
- "can't execute task\n", (int)(sizeof(*m) + len));
+ pr_warn("message too long (%d), can't execute task\n",
+ (int)(sizeof(*m) + len));
return -E2BIG;
}
@@ -198,10 +201,8 @@ static int uvesafb_exec(struct uvesafb_ktask *task)
*/
err = uvesafb_helper_start();
if (err) {
- printk(KERN_ERR "uvesafb: failed to execute %s\n",
- v86d_path);
- printk(KERN_ERR "uvesafb: make sure that the v86d "
- "helper is installed and executable\n");
+ pr_err("failed to execute %s\n", v86d_path);
+ pr_err("make sure that the v86d helper is installed and
executable\n");
} else {
v86d_started = 1;
err = cn_netlink_send(m, 0, 0, gfp_any());
@@ -375,9 +376,8 @@ static u8 *uvesafb_vbe_state_save(struct uvesafb_par *par)
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_WARNING "uvesafb: VBE get state call "
- "failed (eax=0x%x, err=%d)\n",
- task->t.regs.eax, err);
+ pr_warn("VBE get state call failed (eax=0x%x, err=%d)\n",
+ task->t.regs.eax, err);
kfree(state);
state = NULL;
}
@@ -407,9 +407,8 @@ static void uvesafb_vbe_state_restore(struct uvesafb_par
*par, u8 *state_buf)
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f)
- printk(KERN_WARNING "uvesafb: VBE state restore call "
- "failed (eax=0x%x, err=%d)\n",
- task->t.regs.eax, err);
+ pr_warn("VBE state restore call failed (eax=0x%x, err=%d)\n",
+ task->t.regs.eax, err);
uvesafb_free(task);
}
@@ -427,24 +426,22 @@ static int uvesafb_vbe_getinfo(struct uvesafb_ktask *task,
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_ERR "uvesafb: Getting VBE info block failed "
- "(eax=0x%x, err=%d)\n", (u32)task->t.regs.eax,
- err);
+ pr_err("Getting VBE info block failed (eax=0x%x, err=%d)\n",
+ (u32)task->t.regs.eax, err);
return -EINVAL;
}
if (par->vbe_ib.vbe_version < 0x0200) {
- printk(KERN_ERR "uvesafb: Sorry, pre-VBE 2.0 cards are "
- "not supported.\n");
+ pr_err("Sorry, pre-VBE 2.0 cards are not supported\n");
return -EINVAL;
}
if (!par->vbe_ib.mode_list_ptr) {
- printk(KERN_ERR "uvesafb: Missing mode list!\n");
+ pr_err("Missing mode list!\n");
return -EINVAL;
}
- printk(KERN_INFO "uvesafb: ");
+ pr_info("");
/*
* Convert string pointers and the mode list pointer into
@@ -452,23 +449,24 @@ static int uvesafb_vbe_getinfo(struct uvesafb_ktask *task,
* video adapter and its vendor.
*/
if (par->vbe_ib.oem_vendor_name_ptr)
- printk("%s, ",
+ pr_cont("%s, ",
((char *)task->buf) + par->vbe_ib.oem_vendor_name_ptr);
if (par->vbe_ib.oem_product_name_ptr)
- printk("%s, ",
+ pr_cont("%s, ",
((char *)task->buf) + par->vbe_ib.oem_product_name_ptr);
if (par->vbe_ib.oem_product_rev_ptr)
- printk("%s, ",
+ pr_cont("%s, ",
((char *)task->buf) + par->vbe_ib.oem_product_rev_ptr);
if (par->vbe_ib.oem_string_ptr)
- printk("OEM: %s, ",
+ pr_cont("OEM: %s, ",
((char *)task->buf) + par->vbe_ib.oem_string_ptr);
- printk("VBE v%d.%d\n", ((par->vbe_ib.vbe_version & 0xff00) >> 8),
- par->vbe_ib.vbe_version & 0xff);
+ pr_cont("VBE v%d.%d\n",
+ (par->vbe_ib.vbe_version & 0xff00) >> 8,
+ par->vbe_ib.vbe_version & 0xff);
return 0;
}
@@ -507,8 +505,7 @@ static int uvesafb_vbe_getmodes(struct uvesafb_ktask *task,
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_WARNING "uvesafb: Getting mode info block "
- "for mode 0x%x failed (eax=0x%x, err=%d)\n",
+ pr_warn("Getting mode info block for mode 0x%x failed
(eax=0x%x, err=%d)\n",
*mode, (u32)task->t.regs.eax, err);
mode++;
par->vbe_modes_cnt--;
@@ -569,23 +566,20 @@ static int uvesafb_vbe_getpmi(struct uvesafb_ktask *task,
+ task->t.regs.edi);
par->pmi_start = (u8 *)par->pmi_base + par->pmi_base[1];
par->pmi_pal = (u8 *)par->pmi_base + par->pmi_base[2];
- printk(KERN_INFO "uvesafb: protected mode interface info at "
- "%04x:%04x\n",
- (u16)task->t.regs.es, (u16)task->t.regs.edi);
- printk(KERN_INFO "uvesafb: pmi: set display start = %p, "
- "set palette = %p\n", par->pmi_start,
- par->pmi_pal);
+ pr_info("protected mode interface info at %04x:%04x\n",
+ (u16)task->t.regs.es, (u16)task->t.regs.edi);
+ pr_info("pmi: set display start = %p, set palette = %p\n",
+ par->pmi_start, par->pmi_pal);
if (par->pmi_base[3]) {
- printk(KERN_INFO "uvesafb: pmi: ports = ");
+ pr_info("pmi: ports =");
for (i = par->pmi_base[3]/2;
par->pmi_base[i] != 0xffff; i++)
- printk("%x ", par->pmi_base[i]);
- printk("\n");
+ pr_cont(" %x", par->pmi_base[i]);
+ pr_cont("\n");
if (par->pmi_base[i] != 0xffff) {
- printk(KERN_INFO "uvesafb: can't handle memory"
- " requests, pmi disabled\n");
+ pr_info("can't handle memory requests, pmi
disabled\n");
par->ypan = par->pmi_setpal = 0;
}
}
@@ -634,17 +628,13 @@ static int uvesafb_vbe_getedid(struct uvesafb_ktask
*task, struct fb_info *info)
return -EINVAL;
if ((task->t.regs.ebx & 0x3) == 3) {
- printk(KERN_INFO "uvesafb: VBIOS/hardware supports both "
- "DDC1 and DDC2 transfers\n");
+ pr_info("VBIOS/hardware supports both DDC1 and DDC2
transfers\n");
} else if ((task->t.regs.ebx & 0x3) == 2) {
- printk(KERN_INFO "uvesafb: VBIOS/hardware supports DDC2 "
- "transfers\n");
+ pr_info("VBIOS/hardware supports DDC2 transfers\n");
} else if ((task->t.regs.ebx & 0x3) == 1) {
- printk(KERN_INFO "uvesafb: VBIOS/hardware supports DDC1 "
- "transfers\n");
+ pr_info("VBIOS/hardware supports DDC1 transfers\n");
} else {
- printk(KERN_INFO "uvesafb: VBIOS/hardware doesn't support "
- "DDC transfers\n");
+ pr_info("VBIOS/hardware doesn't support DDC transfers\n");
return -EINVAL;
}
@@ -718,14 +708,12 @@ static void uvesafb_vbe_getmonspecs(struct uvesafb_ktask
*task,
}
if (info->monspecs.gtf)
- printk(KERN_INFO
- "uvesafb: monitor limits: vf = %d Hz, hf = %d kHz, "
- "clk = %d MHz\n", info->monspecs.vfmax,
+ pr_info("monitor limits: vf = %d Hz, hf = %d kHz, clk = %d
MHz\n",
+ info->monspecs.vfmax,
(int)(info->monspecs.hfmax / 1000),
(int)(info->monspecs.dclkmax / 1000000));
else
- printk(KERN_INFO "uvesafb: no monitor limits have been set, "
- "default refresh rate will be used\n");
+ pr_info("no monitor limits have been set, default refresh rate
will be used\n");
/* Add VBE modes to the modelist. */
for (i = 0; i < par->vbe_modes_cnt; i++) {
@@ -779,8 +767,7 @@ static void uvesafb_vbe_getstatesize(struct uvesafb_ktask
*task,
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f) {
- printk(KERN_WARNING "uvesafb: VBE state buffer size "
- "cannot be determined (eax=0x%x, err=%d)\n",
+ pr_warn("VBE state buffer size cannot be determined (eax=0x%x,
err=%d)\n",
task->t.regs.eax, err);
par->vbe_state_size = 0;
return;
@@ -815,8 +802,7 @@ static int uvesafb_vbe_init(struct fb_info *info)
if (par->pmi_setpal || par->ypan) {
if (__supported_pte_mask & _PAGE_NX) {
par->pmi_setpal = par->ypan = 0;
- printk(KERN_WARNING "uvesafb: NX protection is active, "
- "better not use the PMI.\n");
+ pr_warn("NX protection is active, better not use the
PMI\n");
} else {
uvesafb_vbe_getpmi(task, par);
}
@@ -859,8 +845,7 @@ static int uvesafb_vbe_init_mode(struct fb_info *info)
goto gotmode;
}
}
- printk(KERN_INFO "uvesafb: requested VBE mode 0x%x is "
- "unavailable\n", vbemode);
+ pr_info("requested VBE mode 0x%x is unavailable\n", vbemode);
vbemode = 0;
}
@@ -1181,8 +1166,8 @@ static int uvesafb_open(struct fb_info *info, int user)
if (!cnt && par->vbe_state_size) {
buf = uvesafb_vbe_state_save(par);
if (IS_ERR(buf)) {
- printk(KERN_WARNING "uvesafb: save hardware state"
- "failed, error code is %ld!\n", PTR_ERR(buf));
+ pr_warn("save hardware state failed, error code is
%ld!\n",
+ PTR_ERR(buf));
} else {
par->vbe_state_orig = buf;
}
@@ -1293,17 +1278,16 @@ static int uvesafb_set_par(struct fb_info *info)
* use our own timings. Try again with the default timings.
*/
if (crtc != NULL) {
- printk(KERN_WARNING "uvesafb: mode switch failed "
- "(eax=0x%x, err=%d). Trying again with "
- "default timings.\n", task->t.regs.eax, err);
+ pr_warn("mode switch failed (eax=0x%x, err=%d) - trying
again with default timings\n",
+ task->t.regs.eax, err);
uvesafb_reset(task);
kfree(crtc);
crtc = NULL;
info->var.pixclock = 0;
goto setmode;
} else {
- printk(KERN_ERR "uvesafb: mode switch failed (eax="
- "0x%x, err=%d)\n", task->t.regs.eax, err);
+ pr_err("mode switch failed (eax=0x%x, err=%d)\n",
+ task->t.regs.eax, err);
err = -EINVAL;
goto out;
}
@@ -1510,13 +1494,11 @@ static void uvesafb_init_info(struct fb_info *info,
struct vbe_mode_ib *mode)
mode->bytes_per_scan_line;
if (par->ypan && info->var.yres_virtual > info->var.yres) {
- printk(KERN_INFO "uvesafb: scrolling: %s "
- "using protected mode interface, "
- "yres_virtual=%d\n",
+ pr_info("scrolling: %s using protected mode interface,
yres_virtual=%d\n",
(par->ypan > 1) ? "ywrap" : "ypan",
info->var.yres_virtual);
} else {
- printk(KERN_INFO "uvesafb: scrolling: redraw\n");
+ pr_info("scrolling: redraw\n");
info->var.yres_virtual = info->var.yres;
par->ypan = 0;
}
@@ -1704,7 +1686,7 @@ static int uvesafb_probe(struct platform_device *dev)
err = uvesafb_vbe_init(info);
if (err) {
- printk(KERN_ERR "uvesafb: vbe_init() failed with %d\n", err);
+ pr_err("vbe_init() failed with %d\n", err);
goto out;
}
@@ -1726,15 +1708,15 @@ static int uvesafb_probe(struct platform_device *dev)
uvesafb_init_info(info, mode);
if (!request_region(0x3c0, 32, "uvesafb")) {
- printk(KERN_ERR "uvesafb: request region 0x3c0-0x3e0 failed\n");
+ pr_err("request region 0x3c0-0x3e0 failed\n");
err = -EIO;
goto out_mode;
}
if (!request_mem_region(info->fix.smem_start, info->fix.smem_len,
"uvesafb")) {
- printk(KERN_ERR "uvesafb: cannot reserve video memory at "
- "0x%lx\n", info->fix.smem_start);
+ pr_err("cannot reserve video memory at 0x%lx\n",
+ info->fix.smem_start);
err = -EIO;
goto out_reg;
}
@@ -1743,10 +1725,8 @@ static int uvesafb_probe(struct platform_device *dev)
uvesafb_ioremap(info);
if (!info->screen_base) {
- printk(KERN_ERR
- "uvesafb: abort, cannot ioremap 0x%x bytes of video "
- "memory at 0x%lx\n",
- info->fix.smem_len, info->fix.smem_start);
+ pr_err("abort, cannot ioremap 0x%x bytes of video memory at
0x%lx\n",
+ info->fix.smem_len, info->fix.smem_start);
err = -EIO;
goto out_mem;
}
@@ -1754,16 +1734,14 @@ static int uvesafb_probe(struct platform_device *dev)
platform_set_drvdata(dev, info);
if (register_framebuffer(info) < 0) {
- printk(KERN_ERR
- "uvesafb: failed to register framebuffer device\n");
+ pr_err("failed to register framebuffer device\n");
err = -EINVAL;
goto out_unmap;
}
- printk(KERN_INFO "uvesafb: framebuffer at 0x%lx, mapped to 0x%p, "
- "using %dk, total %dk\n", info->fix.smem_start,
- info->screen_base, info->fix.smem_len/1024,
- par->vbe_ib.total_memory * 64);
+ pr_info("framebuffer at 0x%lx, mapped to 0x%p, using %dk, total %dk\n",
+ info->fix.smem_start, info->screen_base,
+ info->fix.smem_len / 1024, par->vbe_ib.total_memory * 64);
fb_info(info, "%s frame buffer device\n", info->fix.id);
err = sysfs_create_group(&dev->dev.kobj, &uvesafb_dev_attgrp);
@@ -1871,8 +1849,7 @@ static int uvesafb_setup(char *options)
else if (this_opt[0] >= '0' && this_opt[0] <= '9') {
mode_option = this_opt;
} else {
- printk(KERN_WARNING
- "uvesafb: unrecognized option %s\n", this_opt);
+ pr_warn("unrecognized option %s\n", this_opt);
}
}
@@ -1931,8 +1908,7 @@ static int uvesafb_init(void)
err = driver_create_file(&uvesafb_driver.driver,
&driver_attr_v86d);
if (err) {
- printk(KERN_WARNING "uvesafb: failed to register "
- "attributes\n");
+ pr_warn("failed to register attributes\n");
err = 0;
}
}
--
2.10.0.rc2.1.g053435c
