The denali_cmdfunc() actually does nothing valuable for
NAND_CMD_{PAGEPROG,READ0,SEQIN}.
For NAND_CMD_{READ0,SEQIN}, it copies "page" to "denali->page", then
denali_read_page(_raw) compares them just for the sanity check.
(Inconsistently, this check is missing from denali_write_page(_raw).)
The Denali controller is equipped with high level read/write interface,
so let's skip unneeded call of cmdfunc().
If NAND_ECC_CUSTOM_PAGE_ACCESS is set, nand_write_page() will not
call ->waitfunc hook. So, ->write_page(_raw) hooks should directly
return -EIO on failure. The error handling of page writes will be
much simpler.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v6:
- Squash two commits to adjust to commit 41145649f4ac
(mtd: nand: Wait for PAGEPROG to finish in drivers setting
NAND_ECC_CUSTOM_PAGE_ACCESS)
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2:
- Newly added
drivers/mtd/nand/denali.c | 41 ++++++++++++-----------------------------
drivers/mtd/nand/denali.h | 1 -
2 files changed, 12 insertions(+), 30 deletions(-)
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 2b4618bb8d72..7133a33b4ad3 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -998,13 +998,16 @@ static void denali_setup_dma(struct denali_nand_info
*denali, int op)
* configuration details.
*/
static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, bool raw_xfer)
+ const uint8_t *buf, int page, bool raw_xfer)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
dma_addr_t addr = denali->buf.dma_buf;
size_t size = mtd->writesize + mtd->oobsize;
uint32_t irq_status;
uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
+ int ret = 0;
+
+ denali->page = page;
/*
* if it is a raw xfer, we want to disable ecc and send the spare area.
@@ -1036,13 +1039,13 @@ static int write_page(struct mtd_info *mtd, struct
nand_chip *chip,
if (irq_status == 0) {
dev_err(denali->dev, "timeout on write_page (type = %d)\n",
raw_xfer);
- denali->status = NAND_STATUS_FAIL;
+ ret = -EIO;
}
denali_enable_dma(denali, false);
dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
- return 0;
+ return ret;
}
/* NAND core entry points */
@@ -1059,7 +1062,7 @@ static int denali_write_page(struct mtd_info *mtd, struct
nand_chip *chip,
* for regular page writes, we let HW handle all the ECC
* data written to the device.
*/
- return write_page(mtd, chip, buf, false);
+ return write_page(mtd, chip, buf, page, false);
}
/*
@@ -1075,7 +1078,7 @@ static int denali_write_page_raw(struct mtd_info *mtd,
struct nand_chip *chip,
* for raw page writes, we want to disable ECC and simply write
* whatever data is in the buffer.
*/
- return write_page(mtd, chip, buf, true);
+ return write_page(mtd, chip, buf, page, true);
}
static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
@@ -1105,12 +1108,7 @@ static int denali_read_page(struct mtd_info *mtd, struct
nand_chip *chip,
unsigned long uncor_ecc_flags = 0;
int stat = 0;
- if (page != denali->page) {
- dev_err(denali->dev,
- "IN %s: page %d is not equal to denali->page %d",
- __func__, page, denali->page);
- BUG();
- }
+ denali->page = page;
setup_ecc_for_xfer(denali, true, false);
@@ -1154,12 +1152,7 @@ static int denali_read_page_raw(struct mtd_info *mtd,
struct nand_chip *chip,
size_t size = mtd->writesize + mtd->oobsize;
uint32_t irq_mask = INTR__DMA_CMD_COMP;
- if (page != denali->page) {
- dev_err(denali->dev,
- "IN %s: page %d is not equal to denali->page %d",
- __func__, page, denali->page);
- BUG();
- }
+ denali->page = page;
setup_ecc_for_xfer(denali, false, true);
denali_enable_dma(denali, true);
@@ -1204,12 +1197,7 @@ static void denali_select_chip(struct mtd_info *mtd, int
chip)
static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
{
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- int status = denali->status;
-
- denali->status = 0;
-
- return status;
+ return 0;
}
static int denali_erase(struct mtd_info *mtd, int page)
@@ -1238,8 +1226,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned
int cmd, int col,
int i;
switch (cmd) {
- case NAND_CMD_PAGEPROG:
- break;
case NAND_CMD_STATUS:
read_status(denali);
break;
@@ -1259,10 +1245,6 @@ static void denali_cmdfunc(struct mtd_info *mtd,
unsigned int cmd, int col,
write_byte_to_buf(denali, id);
}
break;
- case NAND_CMD_READ0:
- case NAND_CMD_SEQIN:
- denali->page = page;
- break;
case NAND_CMD_RESET:
reset_bank(denali);
break;
@@ -1605,6 +1587,7 @@ int denali_init(struct denali_nand_info *denali)
mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
+ chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS;
chip->ecc.read_page = denali_read_page;
chip->ecc.read_page_raw = denali_read_page_raw;
chip->ecc.write_page = denali_write_page;
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index a06ed741b550..352d8328b94a 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -323,7 +323,6 @@ struct nand_buf {
struct denali_nand_info {
struct nand_chip nand;
int flash_bank; /* currently selected chip */
- int status;
int platform;
struct nand_buf buf;
struct device *dev;
--
2.7.4
