On Fri, Jun 23, 2017 at 2:29 PM, Gregory CLEMENT <[email protected]> wrote:
> From: Ken Ma <[email protected]> > > If north bridge selection register bit1 is clear, pins [10:8] are for > SDIO0 Resetn, Wakeup, and PDN while if bit1 is set, pins [10:8]are for > GPIO; when bit1 is clear, pin 9 and pin 10 can be used for uart2 RTSn > and CTSn, so bit1 should be added to uart2 group and it must be set > for both "gpio" and "uart" functions of uart2 group. > > Signed-off-by: Ken Ma <[email protected]> > Signed-off-by: Gregory CLEMENT <[email protected]> Patch applied. Yours, Linus Walleij
