On Tue, Jun 20, 2017 at 04:28:30PM +0200, Oleksij Rempel wrote: > for each gpio controller
Please write up a complete sentence. If you can explain a bit why these names are useful would be better. > > Signed-off-by: Oleksij Rempel <[email protected]> > --- > arch/arm/boot/dts/imx6dl-riotboard.dts | 61 > ++++++++++++++++++++++++++++++++++ > 1 file changed, 61 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts > b/arch/arm/boot/dts/imx6dl-riotboard.dts > index 2cb72824e800..b9ecb3b3792a 100644 > --- a/arch/arm/boot/dts/imx6dl-riotboard.dts > +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts > @@ -84,6 +84,67 @@ > }; > }; > > +&gpio1 { > + gpio-line-names = > + "", "", "[SD2_WP]", "", "[SD2_CD]", "I2C3_SCL", > + "I2C3_SDA", "I2C4_SCL", > + "I2C4_SDA", "", "", "", "", "", "", "", > + "", "PWM3", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&gpio2 { > + gpio-line-names = > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&gpio3 { > + gpio-line-names = > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "[USB_OTG_VBUS]", "", > + "UART3_TXD", "UART3_RXD", "", "", "[EIM_D28]", "", "", ""; > +}; > + > +&gpio4 { > + gpio-line-names = > + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", > + "UART5_TXD", "UART5_RXD", "", "", "", "", "", "", > + "GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "", > + "CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO", > + "CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27", > + "CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31"; > +}; > + > +&gpio5 { > + gpio-line-names = > + "", "", "[EIM_A25]", "", "", "GPIO5_05", "GPIO5_06", > + "GPIO5_07", > + "GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO", > + "CSPI2_CS0", "CSPI2_CLK", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&gpio6 { > + gpio-line-names = > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > +&gpio7 { > + gpio-line-names = > + "[SD3_CD]", "[SD3_WP]", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", "", > + "", "", "", "", "", "", "", ""; > +}; > + > &audmux { Please keep the new added nodes sorted alphabetically in label name. Shawn > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_audmux>; > -- > 2.11.0 >
