On Thu, Aug 10, 2017 at 05:35:52PM +0800, Sandy Huang wrote:
> Hi Sean Paul,
> Thanks for your review.
>
> 在 2017/8/10 3:58, Sean Paul 写道:
> > On Wed, Aug 09, 2017 at 06:00:59PM +0800, Sandy Huang wrote:
> > > This adds support for Rockchip soc lvds found on rk3288
> > > Based on the patches from Mark yao and Heiko Stuebner
> > >
> > > Signed-off-by: Sandy Huang <h...@rock-chips.com>
> > > Signed-off-by: Mark yao <mark....@rock-chips.com>
> > > Signed-off-by: Heiko Stuebner <he...@sntech.de>
> > > ---
> > > drivers/gpu/drm/rockchip/Kconfig | 9 +
> > > drivers/gpu/drm/rockchip/Makefile | 1 +
> > > drivers/gpu/drm/rockchip/rockchip_lvds.c | 734
> > > +++++++++++++++++++++++++++++++
> > > drivers/gpu/drm/rockchip/rockchip_lvds.h | 112 +++++
> > > 4 files changed, 856 insertions(+)
> > > create mode 100644 drivers/gpu/drm/rockchip/rockchip_lvds.c
> > > create mode 100644 drivers/gpu/drm/rockchip/rockchip_lvds.h
> > >
<snip />
> > > diff --git a/drivers/gpu/drm/rockchip/rockchip_lvds.c
> > > b/drivers/gpu/drm/rockchip/rockchip_lvds.c
> > > new file mode 100644
> > > index 0000000..a4ad3f0
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/rockchip/rockchip_lvds.c
<snip />
> > > + lvds->drm_dev = drm_dev;
> > > + port = of_graph_get_port_by_id(dev->of_node, 1);
> > > + if (!port) {
> > > + dev_err(dev, "can't found port point, please init lvds panel
> > > port!\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + for_each_child_of_node(port, endpoint) {
> > > + remote = of_graph_get_remote_port_parent(endpoint);
> > > + if (!remote) {
> > > + dev_err(dev, "can't found panel node, please init!\n");
> > > + ret = -EINVAL;
> > > + goto err_put_port;
> > > + }
> > > + if (!of_device_is_available(remote)) {
> > > + of_node_put(remote);
> > > + remote = NULL;
> > > + continue;
> > > + }
> > > + break;
> > > + }
> > > + if (!remote) {
> > > + dev_err(dev, "can't found remote node, please init!\n");
> > > + ret = -EINVAL;
> > > + goto err_put_port;
> > > + }
> > > +
> > > + lvds->panel = of_drm_find_panel(remote);
> > > + if (!lvds->panel)
> > > + lvds->bridge = of_drm_find_bridge(remote);
> >
> > drm_of_find_panel_or_bridge()
> >
>
> because the lvds ports maybe connect to lvds-panel or connect to
> rk1000(which is convert RGB to CVBS output), so i have to get the remote
> port parent and check the status, and final get the active remote point.
>
> lvds_panel: lvds-panel {
> status = "disabled";
> ports {
> panel_in_lvds: endpoint {
> remote-endpoint = <&lvds_out_panel>;
> };
> };
> };
>
> rk1000: rk1000@0xff000000 {
> status = "okay";
> ports {
> rk1000_in_lvds: endpoint {
> remote-endpoint = <&lvds_out_panel>;
> };
> };
> };
>
> &lvds {
> status = "okay";
> ports {
> lvds_out: port@1 {
> reg = <1>;
> lvds_out_panel: endpoint@0 {
> reg = <0>;
> remote-endpoint = <&panel_in_lvds>;
> };
> lvds_out_rk1000: endpoint@1 {
> reg = <1>;
> remote-endpoint = <&rk1000_in_lvds>;
> };
> };
>
> };
> };
Hi Sandy,
Forgive me, this is probably a stupid question. I don't see how this usecase is
unique from the other users of drm_of_find_panel_or_bridge. Couldn't you change
your devicetree bindings to conform to something drm_of_find_panel_or_bridge()
can work with?
Thank you,
Sean
<snip />
> > > --
> > > 2.7.4
> > >
> > >
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-de...@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
>
> --
> Best Regard
>
> 黄家钗
> Sandy Huang
> 福州瑞芯微电子股份有限公司-图形与显示系统部门
> Fuzhou Rockchip Electronics Co.Ltd - Graphics & Display Dept.
> Addr: 福州市鼓楼区铜盘路软件大道89号福州软件园A区21号楼(350003)
> No. 21 Building, A District, No.89,software Boulevard
> Fuzhou,Fujian,PRC
> Tel：+86 0591-87884919 8690
> E-mail：h...@rock-chips.com
>
--
Sean Paul, Software Engineer, Google / Chromium OS
