On 11.09.2017 03:25, Greg Kroah-Hartman wrote:
On Sun, Sep 10, 2017 at 12:26:02PM -0700, Linus Torvalds wrote:
This seems to be a new problem at resume for the Intel btusb driver,
but I'm not seeing anything in that driver itself that looks like a
likely trigger, so I wonder if it's some driver core change, a generic
resume path issue, or a workqueue change that has made it trigger for
me.
It might also just be a timing difference, maybe it's always been there?
Does anybody have any ideas? It does't happen on every resume, and the
machine works despite this (but no bluetooth - the *next* resume might
bring it back, though).
Ah, it's not just me having this problem. I don't see it happening in
4.12, and haven't had the time to bisect it. I seem to be able to
trigger it every suspend/resume cycle, so I don't know if it's a timing
issue.
I see the same problem with QCA hardware.. but a bit different.
On first resume cycle the firmware call is fine but the adapter dies a bit
later with :
'Bluetooth: hci0: Failed to send body at 4 of 1857 (-110)'
On second resume cycle I hit the trace too.
Linus
--
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ACPI: EC: event unblocked
usb 1-3: reset full-speed USB device number 2 using xhci_hcd
usb 1-4: reset full-speed USB device number 3 using xhci_hcd
usb 1-5: reset high-speed USB device number 4 using xhci_hcd
usb 1-3:1.0: rebind failed: -517
usb 1-3:1.1: rebind failed: -517
Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
OOM killer enabled.
Restarting tasks ...
Bluetooth: hci0: Device revision is 5
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
firmware request while host is not available
------------[ cut here ]------------
WARNING: CPU: 2 PID: 621 at drivers/base/firmware_class.c:1250
_request_firmware+0x460/0x790
CPU: 2 PID: 621 Comm: kworker/u9:2 Not tainted 4.13.0-10313-ge860d2c904d1 #11
Hardware name: Dell Inc. XPS 13 9350/09JHRY, BIOS 1.4.17 05/10/2017
Workqueue: hci0 hci_power_on [bluetooth]
task: ffff8d3767895ac0 task.stack: ffff9d3481efc000
RIP: 0010:_request_firmware+0x460/0x790
Call Trace:
request_firmware+0x37/0x50
btusb_setup_intel_new+0x227/0x7e0 [btusb]
hci_dev_do_open+0x3da/0x570 [bluetooth]
hci_power_on+0x52/0x1f0 [bluetooth]
process_one_work+0x1db/0x3d0
worker_thread+0x47/0x3e0
kthread+0x125/0x140
ret_from_fork+0x22/0x30
---[ end trace 007b222491432927 ]---
Bluetooth: hci0: Failed to load Intel firmware file (-112)
[drm] RC6 on
done.
thermal thermal_zone11: failed to read out thermal zone (-5)
PM: suspend exit
Ah, I'll blame Luis for this, I think it might be due to 81f95076281f
("firmware: add sanity check on shutdown/suspend")
Luis, any ideas? I'll try to revert this and try it out tomorrow when
I get a chance.
I can revert it an fire up some testing..
This time with 4.13.x I hit all kind bugs on this box anyway :)
