The pipe selector is used to select some modes (such as USB or PCIe). Otherwise it must be set to 0 (or "unconnected"). This patch does this to ensure it is not set to an incompatible value when using the supported modes (SGMII, 10GKR).
Signed-off-by: Antoine Tenart <[email protected]> --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index 365f0abf5a2f..d3ea824b7ed0 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -111,6 +111,8 @@ #define MVEBU_COMPHY_CONF6_40B BIT(18) #define MVEBU_COMPHY_SELECTOR 0x1140 #define MVEBU_COMPHY_SELECTOR_PHY(n) ((n) * 0x4) +#define MVEBU_COMPHY_PIPE_SELECTOR 0x1144 +#define MVEBU_COMPHY_PIPE_SELECTOR_PIPE(n) ((n) * 0x4) #define MVEBU_COMPHY_LANES 6 #define MVEBU_COMPHY_PORTS 3 @@ -474,6 +476,10 @@ static int mvebu_comphy_power_on(struct phy *phy) if (mux < 0) return -ENOTSUPP; + regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val); + val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id)); + regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val); + regmap_read(priv->regmap, MVEBU_COMPHY_SELECTOR, &val); val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id)); val |= mux << MVEBU_COMPHY_SELECTOR_PHY(lane->id); @@ -525,6 +531,10 @@ static int mvebu_comphy_power_off(struct phy *phy) val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id)); regmap_write(priv->regmap, MVEBU_COMPHY_SELECTOR, val); + regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val); + val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id)); + regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val); + return 0; } -- 2.13.5
