On Tue, Sep 19, 2017 at 10:12:32AM +0100, Lorenzo Pieralisi wrote:
> On Mon, Sep 18, 2017 at 07:00:55PM -0700, Guenter Roeck wrote:
> > Hi,
> >
> > I see the following runtime warnings in mainline when running alpha images
> > in qemu.
> >
> >
> > Floppy drive(s): fd0 is 2.88M
> > ide0: disabled, no IRQ
> > ide0: failed to initialize IDE interface
> > ide0: disabling port
> > cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> > CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
> > cmd64x 0000:00:02.0: can't reserve resources
> > CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
> > ide_generic: please use "probe_mask=0x3f" module parameter for probing all
> > legacy ISA IDE ports
> > ------------[ cut here ]------------
> > WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
> > sysfs: cannot create duplicate filename '/class/ide_port/ide0'
> > ...
> >
> > Trace:
> > [<fffffc00003308a0>] __warn+0x160/0x190
> > [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> > [<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
> > [<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
> > [<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
> > [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> > [<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
> > [<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
> > [<fffffc00005b9d64>] device_add+0x2a4/0x7c0
> > [<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
> > [<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
> > [<fffffc00005ba690>] device_create+0x50/0x70
> > [<fffffc00005df36c>] ide_host_register+0x48c/0xa00
> > [<fffffc00005df330>] ide_host_register+0x450/0xa00
> > [<fffffc00005ba2a0>] device_register+0x20/0x50
> > [<fffffc00005df330>] ide_host_register+0x450/0xa00
> > [<fffffc00005df944>] ide_host_add+0x64/0xe0
> > [<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
> > [<fffffc0000310288>] do_one_initcall+0x68/0x260
> > [<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
> > [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> > [<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
> > [<fffffc00007b13a0>] kernel_init+0x0/0x1a0
> >
> > ---[ end trace 24a70433c3e4d374 ]---
> > ide0: disabling port
> >
> > [ multiple times ]
> >
> > A complete log is available at
> > http://kerneltests.org/builders/qemu-alpha-master.
> >
> > Prior to the offending commit, the kernel log looks as follows.
> >
> > ...
> > Uniform Multi-Platform E-IDE driver
> > cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
> > cmd64x 0000:00:02.0: IDE port disabled
> > cmd64x 0000:00:02.0: 100% native mode on irq 28
> > PCI: Setting latency timer of device 0000:00:02.0 to 64
> > ide0: BM-DMA at 0x8040-0x8047
> > Floppy drive(s): fd0 is 2.88M
> > ide0 at 0x8050-0x8057,0x8062 on irq 28 (serialized)
> > ide_generic: please use "probe_mask=0x3f" module parameter for probing all
> > legacy ISA IDE ports
> > ide1 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide2 at 0x170-0x177,0x376 on irq 15
> > ide-gd driver 1.18
> > ide-cd driver 5.00
> > ...
> >
> > Reverting the commit is not possible due to context changes.
> >
> > Bisect log is attached.
>
> Ok thanks. Can you please check if the diff below fixes the issue ?
>
It does. Feel free to add
Tested-by: Guenter Roeck <li...@roeck-us.net>
to the actual patch.
> I think the problem is that now we allocate the IRQ at device_probe
> instead of device_add time, if the patch below fixes the issue the
> question is whether we want to move pci_assign_irq() to pci_device_add()
> for ALL PCI devices or just fix this for IDE subsytem.
>
That I can not answer ...
Guenter
> Lorenzo
>
> -- >8 --
> diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
> index 112d2fe..94ca9cc 100644
> --- a/drivers/ide/setup-pci.c
> +++ b/drivers/ide/setup-pci.c
> @@ -502,6 +502,8 @@ static int do_ide_setup_pci_device(struct pci_dev *dev,
> {
> int pciirq, ret;
>
> + pci_assign_irq(dev);
> +
> /*
> * Can we trust the reported IRQ?
> */
