On Wed, Sep 27, 2017 at 07:34:09AM +0000, Corentin Labbe wrote:
> Since dwmac-sun8i could use either an integrated PHY or an external PHY
> (which could be at same MDIO address), we need to represent this selection
> by a MDIO switch.
>
> Signed-off-by: Corentin Labbe <clabbe.montj...@gmail.com>
> ---
> arch/arm/boot/dts/sunxi-h3-h5.dtsi | 31 +++++++++++++++++++++++++------
> 1 file changed, 25 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> index 3b7d953429a6..a8e9b8f378ba 100644
> --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
> @@ -422,14 +422,33 @@
> #size-cells = <0>;
> status = "disabled";
>
> - mdio: mdio {
> + mdio0: mdio {
> #address-cells = <1>;
> #size-cells = <0>;
> - int_mii_phy: ethernet-phy@1 {
> - compatible =
> "ethernet-phy-ieee802.3-c22";
> - reg = <1>;
> - clocks = <&ccu CLK_BUS_EPHY>;
> - resets = <&ccu RST_BUS_EPHY>;
> + compatible = "snps,dwmac-mdio";
> +
> + mdio-mux {
> + compatible = "mdio-mux";
> + #address-cells = <1>;
> + #size-cells = <0>;
Newline
> + /* Only one MDIO is usable at the time
> */
> + internal_mdio: mdio@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
Newline
> + int_mii_phy: ethernet-phy@1 {
> + compatible =
> "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + clocks = <&ccu
> CLK_BUS_EPHY>;
> + resets = <&ccu
> RST_BUS_EPHY>;
> + phy-is-integrated;
> + };
> + };
Newline
> + mdio: mdio@2 {
This is quite confusing. Why not call the label external_mdio?
Thanks
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
