Add changes to capture optional dt attribute "debounce-timeout-ms"
provided in extcon node and used the same value if provided otherwise
default value of 20ms is used for id and vbus gpios debounce time.
Signed-off-by: Raveendra Padasalagi <raveendra.padasal...@broadcom.com>
Reviewed-by: Ray Jui <ray....@broadcom.com>
Reviewed-by: Srinath Mannam <srinath.man...@broadcom.com>
---
drivers/extcon/extcon-usb-gpio.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index 9c925b0..090f65f 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -41,6 +41,7 @@ struct usb_extcon_info {
unsigned long debounce_jiffies;
struct delayed_work wq_detcable;
+ unsigned int gpio_debounce_timeout_ms;
};
static const unsigned int usb_extcon_cable[] = {
@@ -133,6 +134,11 @@ static int usb_extcon_probe(struct platform_device *pdev)
if (IS_ERR(info->vbus_gpiod))
return PTR_ERR(info->vbus_gpiod);
+ ret = of_property_read_u32(np, "debounce-timeout-ms",
+ &info->gpio_debounce_timeout_ms);
+ if (ret)
+ info->gpio_debounce_timeout_ms = USB_GPIO_DEBOUNCE_MS;
+
info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
if (IS_ERR(info->edev)) {
dev_err(dev, "failed to allocate extcon device\n");
@@ -147,13 +153,14 @@ static int usb_extcon_probe(struct platform_device *pdev)
if (info->id_gpiod)
ret = gpiod_set_debounce(info->id_gpiod,
- USB_GPIO_DEBOUNCE_MS * 1000);
+ info->gpio_debounce_timeout_ms * 1000);
if (!ret && info->vbus_gpiod)
ret = gpiod_set_debounce(info->vbus_gpiod,
- USB_GPIO_DEBOUNCE_MS * 1000);
+ info->gpio_debounce_timeout_ms * 1000);
if (ret < 0)
- info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
+ info->debounce_jiffies = msecs_to_jiffies(
+ info->gpio_debounce_timeout_ms);
INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
--
1.9.1
