Add the qup uart node and geni se instance needed to support the serial console on the MTP.
Signed-off-by: Rajendra Nayak <[email protected]> --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 42 +++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 21 +++++++++++++++++ 2 files changed, 63 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 617c7bb25fb1..42fbf2ab9a2d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -10,4 +10,46 @@ / { model = "Qualcomm Technologies, Inc. SDM845 MTP"; compatible = "qcom,sdm845-mtp"; + + aliases { + serial0 = &qup_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@a84000 { + status = "okay"; + }; + + pinctrl@3400000 { + qup_uart2_default: qup_uart2_default { + pinmux { + function = "qup9"; + pins = "gpio4", "gpio5"; + }; + + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_uart2_sleep: qup_uart2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 02520f19e4ca..c4ce70840acf 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sdm845.h> / { model = "Qualcomm Technologies, Inc. SDM845"; @@ -273,5 +274,25 @@ cell-index = <0>; }; + qup_1: qcom,geni_se@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0xac0000 0x6000>; + }; + + qup_uart2: serial@a84000 { + compatible = "qcom,geni-console", "qcom,geni-uart"; + reg = <0xa84000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_uart2_default>; + pinctrl-1 = <&qup_uart2_sleep>; + interrupts = <GIC_SPI 354 IRQ_TYPE_NONE>; + qcom,wrapper-core = <&qup_1>; + status = "disabled"; + }; }; }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
