The CVB table contains calibration data for the CPU DFLL based on
process charaterization. The regulator step and offset parameters depend
on the regulator supplying vdd-cpu , not on the specific Tegra SKU.
Hence than hardcoding those regulator parameters in the CVB table,
retrieve them from the regulator framework and store them as part of the
tegra_dfll_soc_data struct.
Signed-off-by: Peter De Schrijver <pdeschrij...@nvidia.com>
---
drivers/clk/tegra/clk-dfll.h | 2 ++
drivers/clk/tegra/clk-tegra124-dfll-fcpu.c | 42 +++++++++++++++++++++++++-----
drivers/clk/tegra/cvb.c | 16 +++++++++---
drivers/clk/tegra/cvb.h | 6 ++---
4 files changed, 53 insertions(+), 13 deletions(-)
diff --git a/drivers/clk/tegra/clk-dfll.h b/drivers/clk/tegra/clk-dfll.h
index 83352c8..e7cbc5b 100644
--- a/drivers/clk/tegra/clk-dfll.h
+++ b/drivers/clk/tegra/clk-dfll.h
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/types.h>
+#include "cvb.h"
/**
* struct tegra_dfll_soc_data - SoC-specific hooks/integration for the DFLL
driver
@@ -35,6 +36,7 @@ struct tegra_dfll_soc_data {
struct device *dev;
unsigned long max_freq;
const struct cvb_table *cvb;
+ struct rail_alignment alignment;
void (*init_clock_trimmers)(void);
void (*set_clock_trimmers_high)(void);
diff --git a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
index 269d359..e2dbb79 100644
--- a/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
+++ b/drivers/clk/tegra/clk-tegra124-dfll-fcpu.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <soc/tegra/fuse.h>
#include "clk.h"
@@ -42,9 +43,6 @@
.process_id = -1,
.min_millivolts = 900,
.max_millivolts = 1260,
- .alignment = {
- .step_uv = 10000, /* 10mV */
- },
.speedo_scale = 100,
.voltage_scale = 1000,
.entries = {
@@ -82,6 +80,34 @@
},
};
+static int get_alignment_from_regulator(struct device *dev,
+ struct rail_alignment *align)
+{
+ int min_uV, max_uV, n_voltages, ret;
+ struct regulator *reg;
+
+ reg = devm_regulator_get(dev, "vdd-cpu");
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ ret = regulator_get_constraint_voltages(reg, &min_uV, &max_uV);
+ if (!ret)
+ align->offset_uv = min_uV;
+ else
+ return ret;
+
+ align->step_uv = regulator_get_linear_step(reg);
+ if (!align->step_uv && !ret) {
+ n_voltages = regulator_count_voltages(reg);
+ if (n_voltages > 1)
+ align->step_uv = (max_uV - min_uV) / (n_voltages - 1);
+ }
+
+ devm_regulator_put(reg);
+
+ return 0;
+}
+
static int tegra124_dfll_fcpu_probe(struct platform_device *pdev)
{
int process_id, speedo_id, speedo_value, err;
@@ -108,10 +134,14 @@ static int tegra124_dfll_fcpu_probe(struct
platform_device *pdev)
}
soc->max_freq = cpu_max_freq_table[speedo_id];
+ err = get_alignment_from_regulator(&pdev->dev, &soc->alignment);
+ if (err < 0)
+ return err;
- soc->cvb = tegra_cvb_add_opp_table(soc->dev, tegra124_cpu_cvb_tables,
- ARRAY_SIZE(tegra124_cpu_cvb_tables),
- process_id, speedo_id, speedo_value,
+ soc->cvb = tegra_cvb_add_opp_table(soc->dev, fcpu_data->cpu_cvb_tables,
+ fcpu_data->cpu_cvb_tables_size,
+ &soc->alignment, process_id,
+ speedo_id, speedo_value,
soc->max_freq);
if (IS_ERR(soc->cvb)) {
dev_err(&pdev->dev, "couldn't add OPP table: %ld\n",
diff --git a/drivers/clk/tegra/cvb.c b/drivers/clk/tegra/cvb.c
index da9e8e7..2aa9639 100644
--- a/drivers/clk/tegra/cvb.c
+++ b/drivers/clk/tegra/cvb.c
@@ -62,11 +62,17 @@ static int round_voltage(int mv, const struct
rail_alignment *align, int up)
}
static int build_opp_table(struct device *dev, const struct cvb_table *table,
+ struct rail_alignment *align,
int speedo_value, unsigned long max_freq)
{
- const struct rail_alignment *align = &table->alignment;
int i, ret, dfll_mv, min_mv, max_mv;
+ if (!align->step_uv)
+ return -EINVAL;
+
+ if (!align->offset_uv)
+ return -EINVAL;
+
min_mv = round_voltage(table->min_millivolts, align, UP);
max_mv = round_voltage(table->max_millivolts, align, DOWN);
@@ -109,8 +115,9 @@ static int build_opp_table(struct device *dev, const struct
cvb_table *table,
*/
const struct cvb_table *
tegra_cvb_add_opp_table(struct device *dev, const struct cvb_table *tables,
- size_t count, int process_id, int speedo_id,
- int speedo_value, unsigned long max_freq)
+ size_t count, struct rail_alignment *align,
+ int process_id, int speedo_id, int speedo_value,
+ unsigned long max_freq)
{
size_t i;
int ret;
@@ -124,7 +131,8 @@ static int build_opp_table(struct device *dev, const struct
cvb_table *table,
if (table->process_id != -1 && table->process_id != process_id)
continue;
- ret = build_opp_table(dev, table, speedo_value, max_freq);
+ ret = build_opp_table(dev, table, align, speedo_value,
+ max_freq);
return ret ? ERR_PTR(ret) : table;
}
diff --git a/drivers/clk/tegra/cvb.h b/drivers/clk/tegra/cvb.h
index c1f0779..bcf15a0 100644
--- a/drivers/clk/tegra/cvb.h
+++ b/drivers/clk/tegra/cvb.h
@@ -49,7 +49,6 @@ struct cvb_table {
int min_millivolts;
int max_millivolts;
- struct rail_alignment alignment;
int speedo_scale;
int voltage_scale;
@@ -59,8 +58,9 @@ struct cvb_table {
const struct cvb_table *
tegra_cvb_add_opp_table(struct device *dev, const struct cvb_table *cvb_tables,
- size_t count, int process_id, int speedo_id,
- int speedo_value, unsigned long max_freq);
+ size_t count, struct rail_alignment *align,
+ int process_id, int speedo_id, int speedo_value,
+ unsigned long max_freq);
void tegra_cvb_remove_opp_table(struct device *dev,
const struct cvb_table *table,
unsigned long max_freq);
--
1.9.1
