Clock gating parameter is a part of `dai_fmt`. It is supported by
`alsa-lib` when creating a topology binary file, but ignored by kernel
when loading this topology file.
After applying this commit, the clock gating parameter is not ignored any
more. The old behaviour is not broken, as by default the parameter value
is 0.
For example, the following config, based on
alsa-lib/src/conf/topology/broadwell/broadwell.conf, is now supported:
~~~~
SectionHWConfig."CodecHWConfig" {
id "1"
format "I2S" # physical audio format.
bclk "master" # Platform is master of bit clock
fsync "master" # platform is master of fsync
pm_gate_clocks "true" # clock can be gated
}
SectionLink."Codec" {
# used for binding to the physical link
id "0"
hw_configs [
"CodecHWConfig"
]
default_hw_conf_id "1"
}
~~~~
Signed-off-by: Kirill Marinushkin <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Takashi Sakamoto <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
sound/soc/soc-topology.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 01a50413c66f..bac70676a6b4 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1981,6 +1981,13 @@ static void set_link_hw_format(struct snd_soc_dai_link
*link,
link->dai_fmt = hw_config->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+ /* clock gating */
+ if (hw_config->clock_gated == SND_SOC_TPLG_DAI_CLK_GATE_GATED)
+ link->dai_fmt |= SND_SOC_DAIFMT_GATED;
+ else if (hw_config->clock_gated ==
+ SND_SOC_TPLG_DAI_CLK_GATE_CONT)
+ link->dai_fmt |= SND_SOC_DAIFMT_CONT;
+
/* clock signal polarity */
invert_bclk = hw_config->invert_bclk;
invert_fsync = hw_config->invert_fsync;
--
2.13.6
