Hi Ludovic,
Please check latest v2 patches series and let me know if it works on
stm32h7 as it does on stm32f4

2018-02-22 12:01 GMT+01:00 Radosław Pietrzyk <radoslaw.pietr...@gmail.com>:
> Hi Ludovic,
> I have tested on stm32f429-disco and it works without a problem.
> handle_edge_irq is not used in current implementation because it is
> substituted by handle_simple_irq in an alloc callback either way which
> causes that irq_ack callback is not invoked as well (acking is done in
> chained handler).
>
> 2018-02-22 11:55 GMT+01:00 Ludovic BARRE <ludovic.ba...@st.com>:
>> Hi Radek
>>
>> I've tested your change on stm32h743i-eval.dts board
>> and gpio-keys tests are not functional.
>> No interrupt occurs when we push or release button
>> (cat /proc/interrupt).
>>
>> Board: stm32h743i-eval.dts
>> Test description: gpio-keys (gpioc 13 => exti 13), with gpio or interrupt
>> property.
>>
>> comment below
>>
>>
>> On 02/21/2018 02:50 PM, radek wrote:
>>>
>>> - allocates generic chip with handle_simple_irq
>>>         which simplifies irq_domain_ops.alloc callback
>>>         - removes ack register from generic chip which is not used for
>>>         handle_simple_irq as acking is done in a chained handler
>>>         - removes unneeded irq_domain_ops.xlate callback
>>>
>>> Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietr...@gmail.com>
>>> ---
>>>   drivers/irqchip/irq-stm32-exti.c | 10 +---------
>>>   1 file changed, 1 insertion(+), 9 deletions(-)
>>>
>>> diff --git a/drivers/irqchip/irq-stm32-exti.c
>>> b/drivers/irqchip/irq-stm32-exti.c
>>> index 36f0fbe..42e74e3 100644
>>> --- a/drivers/irqchip/irq-stm32-exti.c
>>> +++ b/drivers/irqchip/irq-stm32-exti.c
>>> @@ -176,16 +176,12 @@ static int stm32_irq_set_wake(struct irq_data *data,
>>> unsigned int on)
>>>   static int stm32_exti_alloc(struct irq_domain *d, unsigned int virq,
>>>                             unsigned int nr_irqs, void *data)
>>>   {
>>> -       struct irq_chip_generic *gc;
>>>         struct irq_fwspec *fwspec = data;
>>>         irq_hw_number_t hwirq;
>>>         hwirq = fwspec->param[0];
>>> -       gc = irq_get_domain_generic_chip(d, hwirq);
>>>         irq_map_generic_chip(d, virq, hwirq);
>>> -       irq_domain_set_info(d, virq, hwirq, &gc->chip_types->chip, gc,
>>> -                           handle_simple_irq, NULL, NULL);
>>>         return 0;
>>>   }
>>> @@ -200,7 +196,6 @@ static void stm32_exti_free(struct irq_domain *d,
>>> unsigned int virq,
>>>     struct irq_domain_ops irq_exti_domain_ops = {
>>>         .map    = irq_map_generic_chip,
>>> -       .xlate  = irq_domain_xlate_onetwocell,
>>>         .alloc  = stm32_exti_alloc,
>>>         .free   = stm32_exti_free,
>>>   };
>>> @@ -231,7 +226,7 @@ __init stm32_exti_init(const struct stm32_exti_bank
>>> **stm32_exti_banks,
>>>         }
>>>         ret = irq_alloc_domain_generic_chips(domain, IRQS_PER_BANK, 1,
>>> "exti",
>>> -                                            handle_edge_irq, clr, 0, 0);
>>> +                                            handle_simple_irq, clr, 0,
>>> 0);
>>
>>
>> EXTI hardware block is trigged on pulse event rising or failing edge.
>> Why do you change to handle_simple_irq ?
>>
>>>         if (ret) {
>>>                 pr_err("%pOF: Could not allocate generic interrupt
>>> chip.\n",
>>>                         node);
>>> @@ -246,13 +241,10 @@ __init stm32_exti_init(const struct stm32_exti_bank
>>> **stm32_exti_banks,
>>>                 gc->reg_base = base;
>>>                 gc->chip_types->type = IRQ_TYPE_EDGE_BOTH;
>>> -               gc->chip_types->chip.irq_ack = irq_gc_ack_set_bit;
>>>                 gc->chip_types->chip.irq_mask = irq_gc_mask_clr_bit;
>>>                 gc->chip_types->chip.irq_unmask = irq_gc_mask_set_bit;
>>>                 gc->chip_types->chip.irq_set_type = stm32_irq_set_type;
>>>                 gc->chip_types->chip.irq_set_wake = stm32_irq_set_wake;
>>> -               gc->chip_types->regs.ack = stm32_bank->pr_ofst;
>>> -               gc->chip_types->regs.mask = stm32_bank->imr_ofst;
>>>                 gc->private = (void *)stm32_bank;
>>>                 /* Determine number of irqs supported */
>>>
>>
>> BR
>> Ludo

Reply via email to