Add documentation to describe Xilinx ZynqMP power management
bindings.
Signed-off-by: Jolly Shah <[email protected]>
Signed-off-by: Rajan Vaja <[email protected]>
---
.../bindings/soc/xilinx/xlnx,zynqmp-power.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644
Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-power.txt
diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-power.txt
b/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-power.txt
new file mode 100644
index 0000000..5b7d963
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,zynqmp-power.txt
@@ -0,0 +1,28 @@
+Xilinx Zynq MPSoC Power Management Device Tree Bindings
+
+The zynqmp-power node describes the power management configurations.
+
+Required properties:
+ - compatible : Must contain: "xlnx,zynqmp-power"
+ - mbox-names : Name given to channels seen in the 'mboxes' property.
+ "rx" - Mailbox corresponding to receive path
+ "tx" - Mailbox corresponding to transmit path
+ - mboxes : Standard property to specify a Mailbox. Each value of
+ the mboxes property should contain a phandle to the
+ mailbox controller device node and an args specifier
+ that will be the phandle to the intended sub-mailbox
+ child node to be used for communication. See
+ Documentation/devicetree/bindings/mailbox/mailbox.txt
+ for more details about the generic mailbox controller
+ and client driver bindings. Also see
+ Documentation/devicetree/bindings/mailbox/ \
+ xlnx,zynqmp-ipi-mailbox.txt for typical controller that
+ is used to communicate with this System controllers.
+
+Examples:
+ zynqmp_power: zynqmp-power {
+ compatible = "xlnx,zynqmp-power";
+ mboxes = <&ipi_mailbox_pmu0 0>,
+ <&ipi_mailbox_pmu0 1>;
+ mbox-names = "tx", "rx";
+ };
--
2.7.4
