Some regulators require keeping their voltage spread below defined max_spread.
Add properties to provide information on regulators' coupling. Reviewed-by: Rob Herring <r...@kernel.org> Signed-off-by: Maciej Purski <m.pur...@samsung.com> --- Documentation/devicetree/bindings/regulator/regulator.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 2babe15b..62510d6 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -68,6 +68,11 @@ Optional properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. +- regulator-coupled-with: Regulators with which the regulator + is coupled. The linkage is 2-way - all coupled regulators should be linked + with each other. +- regulator-coupled-max-spread: Max spread between voltages of coupled regulators + in microvolts. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple -- 2.7.4