Add a device tree for the Microsemi Ocelot PCB123 evaluation board.

Cc: Rob Herring <robh...@kernel.org>
Cc: devicet...@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.bell...@bootlin.com>
---
 arch/mips/boot/dts/mscc/Makefile          |  2 ++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 27 +++++++++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts

diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
index dd08e63a10ba..c51164537c02 100644
--- a/arch/mips/boot/dts/mscc/Makefile
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -1 +1,3 @@
+dtb-$(CONFIG_LEGACY_BOARD_OCELOT)      += ocelot_pcb123.dtb
+
 obj-y                          += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts 
b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
new file mode 100644
index 000000000000..b4e3860c6cf4
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -0,0 +1,27 @@
+//SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include "ocelot.dtsi"
+
+/ {
+       compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x0e000000>;
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
-- 
2.16.2

Reply via email to