Add bindings for Microsemi SoCs. Currently only Ocelot is supported.
Reviewed-by: Rob Herring <robh...@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.bell...@bootlin.com>
---
Documentation/devicetree/bindings/mips/mscc.txt | 43 +++++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt
b/Documentation/devicetree/bindings/mips/mscc.txt
new file mode 100644
index 000000000000..ae15ec333542
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -0,0 +1,43 @@
+* Microsemi MIPS CPUs
+
+Boards with a SoC of the Microsemi MIPS family shall have the following
+properties:
+
+Required properties:
+- compatible: "mscc,ocelot"
+
+
+* Other peripherals:
+
+o CPU chip regs:
+
+The SoC has a few registers (DEVCPU_GCB:CHIP_REGS) handling miscellaneous
+functionalities: chip ID, general purpose register for software use, reset
+controller, hardware status and configuration, efuses.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-chip-regs", "simple-mfd", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+ syscon@71070000 {
+ compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
+ reg = <0x71070000 0x1c>;
+ };
+
+
+o CPU system control:
+
+The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration
of
+the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
+endianness, CPU bus control, CPU status.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
+- reg : Should contain registers location and length
+
+Example:
+ syscon@70000000 {
+ compatible = "mscc,ocelot-cpu-syscon", "syscon";
+ reg = <0x70000000 0x2c>;
+ };
--
2.16.2
