On Mon, Mar 05 2018 at 17:21 -0700, Stephen Boyd wrote:
Quoting Lina Iyer (2018-02-26 09:58:02)
diff --git a/Documentation/devicetree/bindings/arm/msm/cmd-db.txt 
new file mode 100644
index 000000000000..5737ed2ac6e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/cmd-db.txt
@@ -0,0 +1,38 @@
+Command DB
+Command DB is a database that provides a mapping between resource key and the

s/between/between the/

+resource address for a system resource managed by a remote processor. The data
+is stored in a shared memory region and is loaded by the remote processor.
+Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for


+controlling shared resources. Depending on the board configuration the shared
+resource properties may change. These properties are dynamically probed by the
+remote processor and made available in the shared memory.
+The bindings for Command DB is specified in the reserved-memory section in



+devicetree. The devicetree representation of the command DB driver should be:

Maybe drop this last sentence entirely.

+- compatible:
+       Usage: required
+       Value type: <string>
+       Definition: Should be "qcom,cmd-db"
+- reg:
+       Usage: required
+       Value type: <prop encoded array>
+       Definition: The register address that points to the location of the
+                   Command DB in memory. Additionally, specify the address
+                   and size of the actual lacation in memory.


Will take care of these in the next spin.

+       reserved-memory {
+               [...]
+               qcom,cmd-db@c3f000c {
+                       reg = <0x0 0xc3f000c 0x0 0x8>,
+                             <0x0 0x85fe0000 0x0 0x20000>;
+                       compatible = "qcom,cmd-db";
+               };
+       };

Reply via email to