On Sun, 4 Mar 2018 18:11:17 +0530
Shreeya Patel <shreeya.patel23...@gmail.com> wrote:
> Make some of the macro names according to the names
> given in the datasheet of the adis16209 driver.
>
> Signed-off-by: Shreeya Patel <shreeya.patel23...@gmail.com>
A small comment inline which we should clear up in a follow up patch.
> ---
>
> Changes in v3
> -Introduce this new patch for v3 of the series.
>
> drivers/staging/iio/accel/adis16209.c | 48
> +++++++++++++++++------------------
> 1 file changed, 24 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/staging/iio/accel/adis16209.c
> b/drivers/staging/iio/accel/adis16209.c
> index d8aef9c..eb5c878 100644
> --- a/drivers/staging/iio/accel/adis16209.c
> +++ b/drivers/staging/iio/accel/adis16209.c
> @@ -68,21 +68,21 @@
> #define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
> #define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
>
> -#define ADIS16209_DIAG_STAT_REG 0x3C
> -#define ADIS16209_DIAG_STAT_ALARM2 BIT(9)
> -#define ADIS16209_DIAG_STAT_ALARM1 BIT(8)
> -#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5
> -#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3
> -#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2
> +#define ADIS16209_STAT_REG 0x3C
> +#define ADIS16209_STAT_ALARM2 BIT(9)
> +#define ADIS16209_STAT_ALARM1 BIT(8)
> +#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
> +#define ADIS16209_STAT_SPI_FAIL_BIT 3
> +#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
Given these are also fields of the STAT_REG, be it defined in a different
fashion I think they should also have the small additional indent.
> /* Power supply above 3.625 V */
> -#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1
> +#define ADIS16209_STAT_POWER_HIGH_BIT 1
> /* Power supply below 3.15 V */
> -#define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0
> +#define ADIS16209_STAT_POWER_LOW_BIT 0
>
> -#define ADIS16209_GLOB_CMD_REG 0x3E
> -#define ADIS16209_GLOB_CMD_SW_RESET BIT(7)
> -#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4)
> -#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1)
> +#define ADIS16209_CMD_REG 0x3E
> +#define ADIS16209_CMD_SW_RESET BIT(7)
> +#define ADIS16209_CMD_CLEAR_STAT BIT(4)
> +#define ADIS16209_CMD_FACTORY_CAL BIT(1)
>
> #define ADIS16209_ERROR_ACTIVE BIT(14)
>
> @@ -238,29 +238,29 @@ static const struct iio_info adis16209_info = {
> };
>
> static const char * const adis16209_status_error_msgs[] = {
> - [ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
> - [ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
> - [ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
> - [ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> - [ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> + [ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
> + [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
> + [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
> + [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> + [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> };
>
> static const struct adis_data adis16209_data = {
> .read_delay = 30,
> .msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
> - .glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
> - .diag_stat_reg = ADIS16209_DIAG_STAT_REG,
> + .glob_cmd_reg = ADIS16209_CMD_REG,
> + .diag_stat_reg = ADIS16209_STAT_REG,
>
> .self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
> .self_test_no_autoclear = true,
> .startup_delay = ADIS16209_STARTUP_DELAY_MS,
>
> .status_error_msgs = adis16209_status_error_msgs,
> - .status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
> - BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
> - BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
> - BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
> - BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
> + .status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
> + BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
> + BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
> + BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
> + BIT(ADIS16209_STAT_POWER_LOW_BIT),
> };
>
> static int adis16209_probe(struct spi_device *spi)
