On Wed, Mar 07, 2018 at 10:21:43AM -0800, Tony Lindgren wrote:
> We can support the RSTCTRL reset registers on many TI SoCs with
> reset-simple.
> 
> Note that some devices will also need to check the RSTST bits
> for reset reason. Support for these could be possibly added to
> the reset controller framework later on.
> 
> Cc: Dave Gerlach <d-gerl...@ti.com>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: Nishant Menon <n...@ti.com>
> Cc: Philipp Zabel <p.za...@pengutronix.de>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Suman Anna <s-a...@ti.com>
> Cc: Tero Kristo <t-kri...@ti.com>
> Signed-off-by: Tony Lindgren <t...@atomide.com>
> ---
> 
> Changes since v1:
> - Update patch description to mention the unhandled RSTST bits
> - Rebase against Linux next
> 
> ---
>  .../devicetree/bindings/reset/ti-rstctrl.txt         | 20 
> ++++++++++++++++++++
>  drivers/reset/Kconfig                                |  3 ++-
>  drivers/reset/reset-simple.c                         |  1 +
>  3 files changed, 23 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/reset/ti-rstctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/ti-rstctrl.txt 
> b/Documentation/devicetree/bindings/reset/ti-rstctrl.txt
> new file mode 100644
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/ti-rstctrl.txt
> @@ -0,0 +1,20 @@
> +TI RSTCTRL Reset Controller
> +
> +Required properties:
> +- compatible : "ti,rstctrl"
> +- reg : Should contain 1 register ranges(address and length)
> +- #reset-cells: 1
> +
> +Example:
> +     prm_gfx: prm@1100 {
> +             compatible = "simple-bus";

What's a PRM?

> +             #address-cells = <1>;
> +             #size-cells = <1>;
> +             ranges = <0 0x1100 0x100>;

And what else is in this range?

> +
> +             gfx_rstctrl: rstctrl@4 {
> +                     compatible = "ti,rstctrl";
> +                     reg = <0x4 0x4>;

Anytime I see a single register in DT I worry about scaling. How many of 
these in an SoC?

> +                     #reset-cells = <1>;
> +             };
> +     };

Reply via email to