On Tue, 13 Mar 2018, Richard Fitzgerald wrote:
> This adds the generic core support for Cirrus Logic "Madera" class codecs.
> These are complex audio codec SoCs with a variety of digital and analogue
> I/O, onboard audio processing and DSPs, and other features.
>
> These codecs are all based off a common set of hardware IP so can be
> supported by a core of common code (with a few minor device-to-device
> variations).
>
> Signed-off-by: Charles Keepax <[email protected]>
> Signed-off-by: Nikesh Oswal <[email protected]>
> Signed-off-by: Richard Fitzgerald <[email protected]>
> ---
> There have been various smallish changes since Lee acked this patch so I have
> decided to err on the side of caution and remove the Ack in case Lee might
> have
> some comments about the current state of the code.
>
> Cumulative changes since Lee acked it:
> - changed to use gpiod for all reset code - affects
> madera_[enable|disable]_hard_reset,
> madera_get_reset_gpio, madera_dev_init
> - use of_device_get_match_data in the spi and i2c probes
> - use __maybe_unused on the pm runtime functions instead of a #ifdef
> - don't put comma after {} list terminators
> - commented why we don't use the devm version of mfd_add_devices
> - don't use regulator_get_exclusive, it fails in the legitimate case of
> having the same
> regulator supply multiple chip supplies
> - the core driver can now be built as a module
> - minor Kconfig change to make the SPI/I2C submodules depend on the core
> module
> as this gives a more user-friendly menuconfig
> - changed the irqchip and codec pdata to be a pointer to remove the build
> dependency
> so we can submit this patch without the irqchip and codec driver patches
> - SPDX license headers
> ---
> MAINTAINERS | 3 +
> drivers/mfd/Kconfig | 29 ++
> drivers/mfd/Makefile | 5 +
> drivers/mfd/madera-core.c | 600
> +++++++++++++++++++++++++++++++++++++++
> drivers/mfd/madera-i2c.c | 139 +++++++++
> drivers/mfd/madera-spi.c | 138 +++++++++
> drivers/mfd/madera.h | 44 +++
> include/linux/mfd/madera/core.h | 187 ++++++++++++
> include/linux/mfd/madera/pdata.h | 63 ++++
> 9 files changed, 1208 insertions(+)
> create mode 100644 drivers/mfd/madera-core.c
> create mode 100644 drivers/mfd/madera-i2c.c
> create mode 100644 drivers/mfd/madera-spi.c
> create mode 100644 drivers/mfd/madera.h
> create mode 100644 include/linux/mfd/madera/core.h
> create mode 100644 include/linux/mfd/madera/pdata.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 40d78683a53f..f7ea1a47496c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3498,7 +3498,10 @@ L: [email protected]
> T: git https://github.com/CirrusLogic/linux-drivers.git
> W: https://github.com/CirrusLogic/linux-drivers/wiki
> S: Supported
> +F: Documentation/devicetree/bindings/mfd/madera.txt
> F: include/linux/mfd/madera/*
> +F: drivers/mfd/madera*
> +F: drivers/mfd/cs47l*
>
> CLEANCACHE API
> M: Konrad Rzeszutek Wilk <[email protected]>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index b860eb5aa194..f5ca392f8bc2 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -232,6 +232,35 @@ config MFD_CROS_EC_CHARDEV
> If you have a supported Chromebook, choose Y or M here.
> The module will be called cros_ec_dev.
>
> +config MFD_MADERA
> + tristate "Cirrus Logic Madera codecs"
> + select MFD_CORE
> + select REGMAP
> + select REGMAP_IRQ
> + select MADERA_IRQ
> + select PINCTRL
> + select PINCTRL_MADERA
> + help
> + Support for the Cirrus Logic Madera platform audio codecs
> +
> +config MFD_MADERA_I2C
> + tristate "Cirrus Logic Madera codecs with I2C"
> + depends on MFD_MADERA
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Support for the Cirrus Logic Madera platform audio SoC
> + core functionality controlled via I2C.
> +
> +config MFD_MADERA_SPI
> + tristate "Cirrus Logic Madera codecs with SPI"
> + depends on MFD_MADERA
> + depends on SPI_MASTER
> + select REGMAP_SPI
> + help
> + Support for the Cirrus Logic Madera platform audio SoC
> + core functionality controlled via SPI.
> +
> config MFD_ASIC3
> bool "Compaq ASIC3"
> depends on GPIOLIB && ARM
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index e9fd20dba18d..db9ee6d24d91 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -72,6 +72,11 @@ wm8994-objs := wm8994-core.o
> wm8994-irq.o wm8994-regmap.o
> obj-$(CONFIG_MFD_WM8994) += wm8994.o
> obj-$(CONFIG_MFD_WM97xx) += wm97xx-core.o
>
> +madera-objs := madera-core.o
> +obj-$(CONFIG_MFD_MADERA) += madera.o
> +obj-$(CONFIG_MFD_MADERA_I2C) += madera-i2c.o
> +obj-$(CONFIG_MFD_MADERA_SPI) += madera-spi.o
> +
> obj-$(CONFIG_TPS6105X) += tps6105x.o
> obj-$(CONFIG_TPS65010) += tps65010.o
> obj-$(CONFIG_TPS6507X) += tps6507x.o
> diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
> new file mode 100644
> index 000000000000..fde4aae41608
> --- /dev/null
> +++ b/drivers/mfd/madera-core.c
> @@ -0,0 +1,600 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Core MFD support for Cirrus Logic Madera codecs
> + *
> + * Copyright (C) 2015-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/regulator/machine.h>
> +#include <linux/regulator/of_regulator.h>
> +
> +#include <linux/mfd/madera/core.h>
> +#include <linux/mfd/madera/registers.h>
> +
> +#include "madera.h"
> +
> +#define CS47L35_SILICON_ID 0x6360
> +#define CS47L85_SILICON_ID 0x6338
> +#define CS47L90_SILICON_ID 0x6364
> +
> +#define MADERA_32KZ_MCLK2 1
> +
> +static const char * const madera_core_supplies[] = {
> + "AVDD",
> + "DBVDD1",
> +};
> +
> +static const struct mfd_cell madera_ldo1_devs[] = {
> + { .name = "madera-ldo1" },
> +};
> +
> +static const char * const cs47l35_supplies[] = {
> + "MICVDD",
> + "DBVDD2",
> + "CPVDD1",
> + "CPVDD2",
> + "SPKVDD",
> +};
> +
> +static const struct mfd_cell cs47l35_devs[] = {
> + { .name = "madera-pinctrl", },
> + { .name = "madera-irq", },
> + { .name = "madera-micsupp", },
> + { .name = "madera-gpio", },
> + { .name = "madera-extcon", },
> + {
> + .name = "cs47l35-codec",
> + .parent_supplies = cs47l35_supplies,
> + .num_parent_supplies = ARRAY_SIZE(cs47l35_supplies),
> + },
> +};
> +
> +static const char * const cs47l85_supplies[] = {
> + "MICVDD",
> + "DBVDD2",
> + "DBVDD3",
> + "DBVDD4",
> + "CPVDD1",
> + "CPVDD2",
> + "SPKVDDL",
> + "SPKVDDR",
> +};
> +
> +static const struct mfd_cell cs47l85_devs[] = {
> + { .name = "madera-pinctrl", },
> + { .name = "madera-irq", },
> + { .name = "madera-micsupp" },
> + { .name = "madera-gpio", },
> + { .name = "madera-extcon", },
> + {
> + .name = "cs47l85-codec",
> + .parent_supplies = cs47l85_supplies,
> + .num_parent_supplies = ARRAY_SIZE(cs47l85_supplies),
> + },
> +};
> +
> +static const char * const cs47l90_supplies[] = {
> + "MICVDD",
> + "DBVDD2",
> + "DBVDD3",
> + "DBVDD4",
> + "CPVDD1",
> + "CPVDD2",
> +};
> +
> +static const struct mfd_cell cs47l90_devs[] = {
> + { .name = "madera-pinctrl", },
> + { .name = "madera-irq", },
> + { .name = "madera-micsupp", },
> + { .name = "madera-gpio", },
> + { .name = "madera-extcon", },
> + {
> + .name = "cs47l90-codec",
> + .parent_supplies = cs47l90_supplies,
> + .num_parent_supplies = ARRAY_SIZE(cs47l90_supplies),
> + },
> +};
> +
> +/* Used by madera-i2c and madera-spi drivers */
> +const char *madera_name_from_type(enum madera_type type)
> +{
> + switch (type) {
> + case CS47L35:
> + return "CS47L35";
> + case CS47L85:
> + return "CS47L85";
> + case CS47L90:
> + return "CS47L90";
> + case CS47L91:
> + return "CS47L91";
> + case WM1840:
> + return "WM1840";
> + default:
> + return "Unknown";
> + }
> +}
> +EXPORT_SYMBOL_GPL(madera_name_from_type);
> +
> +#define MADERA_BOOT_POLL_MAX_INTERVAL_US 5000
> +#define MADERA_BOOT_POLL_TIMEOUT_US 25000
> +
> +static int madera_wait_for_boot(struct madera *madera)
> +{
> + unsigned int val;
> + int ret;
> +
> + /*
> + * We can't use an interrupt as we need to runtime resume to do so,
> + * so we poll the status bit. This won't race with the interrupt
> + * handler because it will be blocked on runtime resume.
> + */
> + ret = regmap_read_poll_timeout(madera->regmap,
> + MADERA_IRQ1_RAW_STATUS_1,
> + val,
> + (val & MADERA_BOOT_DONE_STS1),
> + MADERA_BOOT_POLL_MAX_INTERVAL_US,
> + MADERA_BOOT_POLL_TIMEOUT_US);
> +
> + if (ret)
> + dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
> +
> + /*
> + * BOOT_DONE defaults to unmasked on boot so we must ack it.
> + * Do this unconditionally to avoid interrupt storms
Nit: Missing full stop
> + */
> + regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
> + MADERA_BOOT_DONE_EINT1);
> +
> + pm_runtime_mark_last_busy(madera->dev);
> +
> + return ret;
> +}
> +
> +static int madera_soft_reset(struct madera *madera)
> +{
> + int ret;
> +
> + ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
> + if (ret != 0) {
> + dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
> + return ret;
> + }
> +
> + /* Allow time for internal clocks to startup after reset */
> + usleep_range(1000, 2000);
> +
> + return 0;
> +}
> +
> +static void madera_enable_hard_reset(struct madera *madera)
> +{
> + if (!madera->pdata.reset)
> + return;
> +
> + /*
> + * there are many existing out-of-tree users of these codecs that we
Nit: There
> + * can't break so preserve the expected behaviour of setting the line
> + * low to assert reset
> + */
> + gpiod_set_raw_value_cansleep(madera->pdata.reset, 0);
> +}
> +
> +static void madera_disable_hard_reset(struct madera *madera)
> +{
> + if (!madera->pdata.reset)
> + return;
> +
> + gpiod_set_raw_value_cansleep(madera->pdata.reset, 1);
> + usleep_range(1000, 2000);
> +}
> +
> +static int __maybe_unused madera_runtime_resume(struct device *dev)
> +{
> + struct madera *madera = dev_get_drvdata(dev);
> + int ret;
> +
> + dev_dbg(dev, "Leaving sleep mode\n");
> +
> + ret = regulator_enable(madera->dcvdd);
> + if (ret) {
> + dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
> + return ret;
> + }
> +
> + regcache_cache_only(madera->regmap, false);
> + regcache_cache_only(madera->regmap_32bit, false);
> +
> + ret = madera_wait_for_boot(madera);
> + if (ret)
> + goto err;
> +
> + ret = regcache_sync(madera->regmap);
> + if (ret) {
> + dev_err(dev, "Failed to restore 16-bit register cache\n");
> + goto err;
> + }
> +
> + ret = regcache_sync(madera->regmap_32bit);
> + if (ret) {
> + dev_err(dev, "Failed to restore 32-bit register cache\n");
> + goto err;
> + }
> +
> + return 0;
> +
> +err:
> + regcache_cache_only(madera->regmap_32bit, true);
> + regcache_cache_only(madera->regmap, true);
> + regulator_disable(madera->dcvdd);
> +
> + return ret;
> +}
> +
> +static int __maybe_unused madera_runtime_suspend(struct device *dev)
> +{
> + struct madera *madera = dev_get_drvdata(dev);
> +
> + dev_dbg(madera->dev, "Entering sleep mode\n");
> +
> + regcache_cache_only(madera->regmap, true);
> + regcache_mark_dirty(madera->regmap);
> + regcache_cache_only(madera->regmap_32bit, true);
> + regcache_mark_dirty(madera->regmap_32bit);
> +
> + regulator_disable(madera->dcvdd);
> +
> + return 0;
> +}
> +
> +const struct dev_pm_ops madera_pm_ops = {
> + SET_RUNTIME_PM_OPS(madera_runtime_suspend,
> + madera_runtime_resume,
> + NULL)
> +};
> +EXPORT_SYMBOL_GPL(madera_pm_ops);
> +
> +const struct of_device_id madera_of_match[] = {
> + { .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
> + { .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
> + { .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
> + { .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
> + { .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
> + {}
> +};
> +EXPORT_SYMBOL_GPL(madera_of_match);
> +
> +static int madera_get_reset_gpio(struct madera *madera)
> +{
> + struct gpio_desc *reset;
> + int ret;
> +
> + reset = devm_gpiod_get_optional(madera->dev, "reset", GPIOD_OUT_LOW);
> +
Nit: Remove this line.
> + if (IS_ERR(reset)) {
> + ret = PTR_ERR(reset);
> + if (ret == -EPROBE_DEFER)
Reverse the logic and only print the error if !-EPROBE_DEFER, then you
only need one return.
> + return ret;
> +
> + dev_err(madera->dev, "Failed to request /RESET: %d\n", ret);
> + return ret;
> + }
> +
> + madera->pdata.reset = reset;
> +
> + return 0;
> +}
> +
> +static void madera_set_micbias_info(struct madera *madera)
> +{
> + /*
> + * childbias is an array because future codecs can have different
You mean num_childbias?
> + * childbiases for each micbias
> + */
> + switch (madera->type) {
> + case CS47L35:
> + madera->num_micbias = 2;
> + madera->num_childbias[0] = 2;
> + madera->num_childbias[1] = 2;
> + return;
> + case CS47L85:
> + case WM1840:
> + madera->num_micbias = 4;
Where are the num_childbias[x] initialised for this device?
> + return;
> + case CS47L90:
> + case CS47L91:
> + madera->num_micbias = 2;
> + madera->num_childbias[0] = 4;
> + madera->num_childbias[1] = 4;
> + return;
> + default:
> + return;
> + }
> +}
> +
> +int madera_dev_init(struct madera *madera)
> +{
> + struct device *dev = madera->dev;
> + unsigned int hwid;
> + int (*patch_fn)(struct madera *) = NULL;
> + const struct mfd_cell *mfd_devs;
> + int n_devs = 0;
> + int i, ret;
> +
> + dev_set_drvdata(madera->dev, madera);
> + BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
> + madera_set_micbias_info(madera);
> +
> + if (dev_get_platdata(madera->dev)) {
> + memcpy(&madera->pdata, dev_get_platdata(madera->dev),
> + sizeof(madera->pdata));
> + }
Hmm... not sure about this.
Normally we extract what we need from pdata and place it into your ddata.
> + if (!madera->pdata.reset) {
> + ret = madera_get_reset_gpio(madera);
> + if (ret)
> + return ret;
> + }
> + if (!madera->pdata.reset)
> + dev_warn(madera->dev,
> + "Running without reset GPIO is not recommended\n");
Is this even possible? If so, handle it in madera_get_reset_gpio().
> + regcache_cache_only(madera->regmap, true);
> + regcache_cache_only(madera->regmap_32bit, true);
> +
> + for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)
> + madera->core_supplies[i].supply = madera_core_supplies[i];
> +
> + madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
> +
> + /*
> + * On some codecs DCVDD could be supplied by the internal LDO1.
> + * For those we must add the LDO1 driver before requesting DCVDD
> + * No devm_ because we need to control shutdown order of children.
> + */
> + switch (madera->type) {
> + case CS47L35:
> + case CS47L90:
> + case CS47L91:
> + break;
> + case CS47L85:
> + case WM1840:
> + ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> + madera_ldo1_devs,
> + ARRAY_SIZE(madera_ldo1_devs),
> + NULL, 0, NULL);
LEE: Is there any guarantee?
#########################################################
#########################################################
#########################################################
#########################################################
#########################################################
#########################################################
> + if (ret) {
> + dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
> + return ret;
> + }
> + break;
> + default:
> + /* No point continuing if the type is unknown */
> + dev_err(madera->dev, "Unknown device type %d\n", madera->type);
> + return -ENODEV;
> + }
> +
> + ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,
> + madera->core_supplies);
> + if (ret) {
> + dev_err(dev, "Failed to request core supplies: %d\n", ret);
> + goto err_devs;
> + }
> +
> + /*
> + * Don't use devres here because the only device we have to get
> + * against is the MFD device and DCVDD will likely be supplied by
> + * one of its children. Meaning that the regulator will be
> + * destroyed by the time devres calls regulator put.
> + */
I'm confused. So the regulator you're *_get()ing doesn't exist yet?
> + madera->dcvdd = regulator_get(madera->dev, "DCVDD");
> + if (IS_ERR(madera->dcvdd)) {
> + ret = PTR_ERR(madera->dcvdd);
> + dev_err(dev, "Failed to request DCVDD: %d\n", ret);
> + goto err_devs;
> + }
> +
> + ret = regulator_bulk_enable(madera->num_core_supplies,
> + madera->core_supplies);
> + if (ret) {
> + dev_err(dev, "Failed to enable core supplies: %d\n", ret);
> + goto err_dcvdd;
> + }
> +
> + ret = regulator_enable(madera->dcvdd);
> + if (ret) {
> + dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
> + goto err_enable;
> + }
> +
> + madera_disable_hard_reset(madera);
> +
> + regcache_cache_only(madera->regmap, false);
> + regcache_cache_only(madera->regmap_32bit, false);
> +
> + /*
> + * Verify that this is a chip we know about before we
> + * starting doing any writes to its registers
Nit: start
Shouldn't you do this *before* you start to set everything up above?
> + */
> + ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
MADERA_SOFTWARE_RESET ?
> + if (ret) {
> + dev_err(dev, "Failed to read ID register: %d\n", ret);
> + goto err_reset;
> + }
> +
> + switch (hwid) {
> + case CS47L35_SILICON_ID:
> + if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> + switch (madera->type) {
> + case CS47L35:
> + patch_fn = cs47l35_patch;
I've always hated these.
Why doesn't the device come with a sensible default configuration
that you can sensibly adjust accordingly in a *sane* way?
> + mfd_devs = cs47l35_devs;
> + n_devs = ARRAY_SIZE(cs47l35_devs);
> + break;
> + default:
> + break;
> + }
> + }
> + break;
> + case CS47L85_SILICON_ID:
> + if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> + switch (madera->type) {
> + case CS47L85:
> + case WM1840:
> + patch_fn = cs47l85_patch;
> + mfd_devs = cs47l85_devs;
> + n_devs = ARRAY_SIZE(cs47l85_devs);
> + break;
> + default:
> + break;
> + }
> + }
> + break;
> + case CS47L90_SILICON_ID:
> + if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> + switch (madera->type) {
> + case CS47L90:
> + case CS47L91:
> + patch_fn = cs47l90_patch;
> + mfd_devs = cs47l90_devs;
> + n_devs = ARRAY_SIZE(cs47l90_devs);
> + break;
> + default:
> + break;
> + }
> + }
> + break;
> + default:
> + dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
> + ret = -EINVAL;
> + goto err_reset;
> + }
> +
> + if (!n_devs) {
> + dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid,
> + madera->type_name);
> + ret = -ENODEV;
> + goto err_reset;
> + }
> +
> + /*
> + * It looks like a device we support. If we don't have a hard reset
> + * we can now attempt a soft reset
> + */
> + if (!madera->pdata.reset) {
Call the reset regardless and do any affiliated checks *inside*.
> + ret = madera_soft_reset(madera);
> + if (ret)
> + goto err_reset;
> + }
> +
> + ret = madera_wait_for_boot(madera);
> + if (ret) {
> + dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
> + goto err_reset;
> + }
> +
> + ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,
> + &madera->rev);
> + if (ret) {
> + dev_err(dev, "Failed to read revision register: %d\n", ret);
> + goto err_reset;
> + }
> + madera->rev &= MADERA_HW_REVISION_MASK;
> +
> + dev_info(dev, "%s silicon revision %d\n", madera->type_name,
> + madera->rev);
> +
> + /* Apply hardware patch */
> + if (patch_fn) {
> + ret = patch_fn(madera);
> + if (ret) {
> + dev_err(madera->dev, "Failed to apply patch %d\n", ret);
> + goto err_reset;
> + }
> + }
> +
> + /* Init 32k clock sourced from MCLK2 */
> + ret = regmap_update_bits(madera->regmap,
> + MADERA_CLOCK_32K_1,
> + MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
> + MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
> + if (ret) {
> + dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
> + goto err_reset;
> + }
> +
> + pm_runtime_set_active(madera->dev);
> + pm_runtime_enable(madera->dev);
> + pm_runtime_set_autosuspend_delay(madera->dev, 100);
> + pm_runtime_use_autosuspend(madera->dev);
> +
> + /* No devm_ because we need to control shutdown order of children */
> + ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
> + mfd_devs, n_devs,
> + NULL, 0, NULL);
> + if (ret) {
> + dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
> + goto err_pm_runtime;
> + }
> +
> + return 0;
> +
> +err_pm_runtime:
> + pm_runtime_disable(madera->dev);
> +err_reset:
> + madera_enable_hard_reset(madera);
> + regulator_disable(madera->dcvdd);
> +err_enable:
> + regulator_bulk_disable(madera->num_core_supplies,
> + madera->core_supplies);
> +err_dcvdd:
> + regulator_put(madera->dcvdd);
> +err_devs:
> + mfd_remove_devices(dev);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(madera_dev_init);
> +
> +int madera_dev_exit(struct madera *madera)
> +{
> + /* Prevent any IRQs being serviced while we clean up */
> + disable_irq(madera->irq);
> +
> + /*
> + * DCVDD could be supplied by a child node, we must disable it before
> + * removing the children, and prevent PM runtime from turning it back on
> + */
> + pm_runtime_disable(madera->dev);
> +
> + regulator_disable(madera->dcvdd);
> + regulator_put(madera->dcvdd);
> +
> + mfd_remove_devices(madera->dev);
> + madera_enable_hard_reset(madera);
> +
> + regulator_bulk_disable(madera->num_core_supplies,
> + madera->core_supplies);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(madera_dev_exit);
> +
> +MODULE_DESCRIPTION("Madera core MFD driver");
> +MODULE_AUTHOR("Richard Fitzgerald <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c
> new file mode 100644
> index 000000000000..ac2ad4a97766
> --- /dev/null
> +++ b/drivers/mfd/madera-i2c.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * I2C bus interface to Cirrus Logic Madera codecs
> + *
> + * Copyright (C) 2015-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/madera/core.h>
> +
> +#include "madera.h"
> +
> +static int madera_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct madera *madera;
> + const struct regmap_config *regmap_16bit_config = NULL;
> + const struct regmap_config *regmap_32bit_config = NULL;
> + const void *of_data;
> + unsigned long type;
> + const char *name;
> + int ret;
> +
> + of_data = of_device_get_match_data(&i2c->dev);
> + if (of_data)
> + type = (unsigned long)of_data;
> + else
> + type = id->driver_data;
> +
> + switch (type) {
> + case CS47L35:
> + if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> + regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
> + regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
> + }
> + break;
> + case CS47L85:
> + case WM1840:
> + if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> + regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
> + regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
> + }
> + break;
> + case CS47L90:
> + case CS47L91:
> + if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> + regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
> + regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
> + }
> + break;
> + default:
> + dev_err(&i2c->dev,
> + "Unknown Madera I2C device type %ld\n", type);
> + return -EINVAL;
> + }
> +
> + name = madera_name_from_type(type);
> +
> + if (!regmap_16bit_config) {
> + dev_err(&i2c->dev,
> + "Kernel does not include support for %s\n", name);
So you have provided support for devices in madera_name_from_type(),
but not elsewhere?
> + return -EINVAL;
> + }
> +
> + madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
> + if (!madera)
> + return -ENOMEM;
> +
> +
> + madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
> + if (IS_ERR(madera->regmap)) {
> + ret = PTR_ERR(madera->regmap);
> + dev_err(&i2c->dev,
> + "Failed to allocate 16-bit register map: %d\n", ret);
> + return ret;
> + }
> +
> + madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
> + if (IS_ERR(madera->regmap_32bit)) {
> + ret = PTR_ERR(madera->regmap_32bit);
> + dev_err(&i2c->dev,
> + "Failed to allocate 32-bit register map: %d\n", ret);
> + return ret;
> + }
> +
> + madera->type = type;
> + madera->type_name = name;
> + madera->dev = &i2c->dev;
> + madera->irq = i2c->irq;
> +
> + return madera_dev_init(madera);
> +}
> +
> +static int madera_i2c_remove(struct i2c_client *i2c)
> +{
> + struct madera *madera = dev_get_drvdata(&i2c->dev);
> +
> + madera_dev_exit(madera);
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id madera_i2c_id[] = {
> + { "cs47l35", CS47L35 },
> + { "cs47l85", CS47L85 },
> + { "cs47l90", CS47L90 },
> + { "cs47l91", CS47L91 },
> + { "wm1840", WM1840 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, madera_i2c_id);
> +
> +static struct i2c_driver madera_i2c_driver = {
> + .driver = {
> + .name = "madera",
> + .pm = &madera_pm_ops,
> + .of_match_table = of_match_ptr(madera_of_match),
> + },
> + .probe = madera_i2c_probe,
> + .remove = madera_i2c_remove,
> + .id_table = madera_i2c_id,
> +};
> +
> +module_i2c_driver(madera_i2c_driver);
> +
> +MODULE_DESCRIPTION("Madera I2C bus interface");
> +MODULE_AUTHOR("Richard Fitzgerald <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c
> new file mode 100644
> index 000000000000..ff5c545dc575
> --- /dev/null
> +++ b/drivers/mfd/madera-spi.c
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SPI bus interface to Cirrus Logic Madera codecs
> + *
> + * Copyright (C) 2015-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +
> +#include <linux/mfd/madera/core.h>
> +
> +#include "madera.h"
> +
> +static int madera_spi_probe(struct spi_device *spi)
> +{
> + const struct spi_device_id *id = spi_get_device_id(spi);
> + struct madera *madera;
> + const struct regmap_config *regmap_16bit_config = NULL;
> + const struct regmap_config *regmap_32bit_config = NULL;
> + const void *of_data;
> + unsigned long type;
> + const char *name;
> + int ret;
> +
> + of_data = of_device_get_match_data(&spi->dev);
> + if (of_data)
> + type = (unsigned long)of_data;
> + else
> + type = id->driver_data;
> +
> + switch (type) {
> + case CS47L35:
> + if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
> + regmap_16bit_config = &cs47l35_16bit_spi_regmap;
> + regmap_32bit_config = &cs47l35_32bit_spi_regmap;
> + }
> + break;
> + case CS47L85:
> + case WM1840:
> + if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
> + regmap_16bit_config = &cs47l85_16bit_spi_regmap;
> + regmap_32bit_config = &cs47l85_32bit_spi_regmap;
> + }
> + break;
> + case CS47L90:
> + case CS47L91:
> + if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
> + regmap_16bit_config = &cs47l90_16bit_spi_regmap;
> + regmap_32bit_config = &cs47l90_32bit_spi_regmap;
> + }
> + break;
> + default:
> + dev_err(&spi->dev,
> + "Unknown Madera SPI device type %ld\n", type);
> + return -EINVAL;
> + }
> +
> + name = madera_name_from_type(type);
> +
> + if (!regmap_16bit_config) {
> + dev_err(&spi->dev,
> + "Kernel does not include support for %s\n", name);
As above?
> + return -EINVAL;
> + }
> +
> + madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
> + if (!madera)
> + return -ENOMEM;
> +
> + madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
> + if (IS_ERR(madera->regmap)) {
> + ret = PTR_ERR(madera->regmap);
> + dev_err(&spi->dev,
> + "Failed to allocate 16-bit register map: %d\n", ret);
> + return ret;
> + }
> +
> + madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
> + if (IS_ERR(madera->regmap_32bit)) {
> + ret = PTR_ERR(madera->regmap_32bit);
> + dev_err(&spi->dev,
> + "Failed to allocate 32-bit register map: %d\n", ret);
> + return ret;
> + }
> +
> + madera->type = type;
> + madera->type_name = name;
> + madera->dev = &spi->dev;
> + madera->irq = spi->irq;
> +
> + return madera_dev_init(madera);
> +}
> +
> +static int madera_spi_remove(struct spi_device *spi)
> +{
> + struct madera *madera = spi_get_drvdata(spi);
> +
> + madera_dev_exit(madera);
> +
> + return 0;
> +}
> +
> +static const struct spi_device_id madera_spi_ids[] = {
> + { "cs47l35", CS47L35 },
> + { "cs47l85", CS47L85 },
> + { "cs47l90", CS47L90 },
> + { "cs47l91", CS47L91 },
> + { "wm1840", WM1840 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(spi, madera_spi_ids);
> +
> +static struct spi_driver madera_spi_driver = {
> + .driver = {
> + .name = "madera",
> + .pm = &madera_pm_ops,
> + .of_match_table = of_match_ptr(madera_of_match),
> + },
> + .probe = madera_spi_probe,
> + .remove = madera_spi_remove,
> + .id_table = madera_spi_ids,
> +};
> +
> +module_spi_driver(madera_spi_driver);
> +
> +MODULE_DESCRIPTION("Madera SPI bus interface");
> +MODULE_AUTHOR("Richard Fitzgerald <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h
> new file mode 100644
> index 000000000000..891b84efb9a7
> --- /dev/null
> +++ b/drivers/mfd/madera.h
> @@ -0,0 +1,44 @@
> +/*
> + * MFD internals for Cirrus Logic Madera codecs
> + *
> + * Copyright 2015-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef MADERA_MFD_H
> +#define MADERA_MFD_H
> +
> +#include <linux/of.h>
> +#include <linux/pm.h>
> +
> +struct madera;
> +
> +extern const struct dev_pm_ops madera_pm_ops;
> +extern const struct of_device_id madera_of_match[];
> +
> +int madera_dev_init(struct madera *madera);
> +int madera_dev_exit(struct madera *madera);
> +
> +const char *madera_name_from_type(enum madera_type type);
> +
> +extern const struct regmap_config cs47l35_16bit_spi_regmap;
> +extern const struct regmap_config cs47l35_32bit_spi_regmap;
> +extern const struct regmap_config cs47l35_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l35_32bit_i2c_regmap;
> +int cs47l35_patch(struct madera *madera);
> +
> +extern const struct regmap_config cs47l85_16bit_spi_regmap;
> +extern const struct regmap_config cs47l85_32bit_spi_regmap;
> +extern const struct regmap_config cs47l85_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l85_32bit_i2c_regmap;
> +int cs47l85_patch(struct madera *madera);
> +
> +extern const struct regmap_config cs47l90_16bit_spi_regmap;
> +extern const struct regmap_config cs47l90_32bit_spi_regmap;
> +extern const struct regmap_config cs47l90_16bit_i2c_regmap;
> +extern const struct regmap_config cs47l90_32bit_i2c_regmap;
> +int cs47l90_patch(struct madera *madera);
> +#endif
> diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
> new file mode 100644
> index 000000000000..c332681848ef
> --- /dev/null
> +++ b/include/linux/mfd/madera/core.h
> @@ -0,0 +1,187 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MFD internals for Cirrus Logic Madera codecs
> + *
> + * Copyright (C) 2015-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#ifndef MADERA_CORE_H
> +#define MADERA_CORE_H
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/madera/pdata.h>
> +#include <linux/notifier.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +
> +enum madera_type {
> + /* 0 is reserved for indicating failure to identify */
> + CS47L35 = 1,
> + CS47L85 = 2,
> + CS47L90 = 3,
> + CS47L91 = 4,
> + WM1840 = 7,
> +};
> +
> +#define MADERA_MAX_CORE_SUPPLIES 2
> +#define MADERA_MAX_GPIOS 40
> +
> +#define CS47L35_NUM_GPIOS 16
> +#define CS47L85_NUM_GPIOS 40
> +#define CS47L90_NUM_GPIOS 38
> +
> +#define MADERA_MAX_MICBIAS 4
> +
> +/* Notifier events */
> +#define MADERA_NOTIFY_VOICE_TRIGGER 0x1
> +#define MADERA_NOTIFY_HPDET 0x2
> +#define MADERA_NOTIFY_MICDET 0x4
> +
> +/* GPIO Function Definitions */
> +#define MADERA_GP_FN_ALTERNATE 0x00
> +#define MADERA_GP_FN_GPIO 0x01
> +#define MADERA_GP_FN_DSP_GPIO 0x02
> +#define MADERA_GP_FN_IRQ1 0x03
> +#define MADERA_GP_FN_IRQ2 0x04
> +#define MADERA_GP_FN_FLL1_CLOCK 0x10
> +#define MADERA_GP_FN_FLL2_CLOCK 0x11
> +#define MADERA_GP_FN_FLL3_CLOCK 0x12
> +#define MADERA_GP_FN_FLLAO_CLOCK 0x13
> +#define MADERA_GP_FN_FLL1_LOCK 0x18
> +#define MADERA_GP_FN_FLL2_LOCK 0x19
> +#define MADERA_GP_FN_FLL3_LOCK 0x1A
> +#define MADERA_GP_FN_FLLAO_LOCK 0x1B
> +#define MADERA_GP_FN_OPCLK_OUT 0x40
> +#define MADERA_GP_FN_OPCLK_ASYNC_OUT 0x41
> +#define MADERA_GP_FN_PWM1 0x48
> +#define MADERA_GP_FN_PWM2 0x49
> +#define MADERA_GP_FN_SPDIF_OUT 0x4C
> +#define MADERA_GP_FN_HEADPHONE_DET 0x50
> +#define MADERA_GP_FN_MIC_DET 0x58
> +#define MADERA_GP_FN_DRC1_SIGNAL_DETECT 0x80
> +#define MADERA_GP_FN_DRC2_SIGNAL_DETECT 0x81
> +#define MADERA_GP_FN_ASRC1_IN1_LOCK 0x88
> +#define MADERA_GP_FN_ASRC1_IN2_LOCK 0x89
> +#define MADERA_GP_FN_ASRC2_IN1_LOCK 0x8A
> +#define MADERA_GP_FN_ASRC2_IN2_LOCK 0x8B
> +#define MADERA_GP_FN_DSP_IRQ1 0xA0
> +#define MADERA_GP_FN_DSP_IRQ2 0xA1
> +#define MADERA_GP_FN_DSP_IRQ3 0xA2
> +#define MADERA_GP_FN_DSP_IRQ4 0xA3
> +#define MADERA_GP_FN_DSP_IRQ5 0xA4
> +#define MADERA_GP_FN_DSP_IRQ6 0xA5
> +#define MADERA_GP_FN_DSP_IRQ7 0xA6
> +#define MADERA_GP_FN_DSP_IRQ8 0xA7
> +#define MADERA_GP_FN_DSP_IRQ9 0xA8
> +#define MADERA_GP_FN_DSP_IRQ10 0xA9
> +#define MADERA_GP_FN_DSP_IRQ11 0xAA
> +#define MADERA_GP_FN_DSP_IRQ12 0xAB
> +#define MADERA_GP_FN_DSP_IRQ13 0xAC
> +#define MADERA_GP_FN_DSP_IRQ14 0xAD
> +#define MADERA_GP_FN_DSP_IRQ15 0xAE
> +#define MADERA_GP_FN_DSP_IRQ16 0xAF
> +#define MADERA_GP_FN_HPOUT1L_SC 0xB0
> +#define MADERA_GP_FN_HPOUT1R_SC 0xB1
> +#define MADERA_GP_FN_HPOUT2L_SC 0xB2
> +#define MADERA_GP_FN_HPOUT2R_SC 0xB3
> +#define MADERA_GP_FN_HPOUT3L_SC 0xB4
> +#define MADERA_GP_FN_HPOUT4R_SC 0xB5
> +#define MADERA_GP_FN_SPKOUTL_SC 0xB6
> +#define MADERA_GP_FN_SPKOUTR_SC 0xB7
> +#define MADERA_GP_FN_HPOUT1L_ENA 0xC0
> +#define MADERA_GP_FN_HPOUT1R_ENA 0xC1
> +#define MADERA_GP_FN_HPOUT2L_ENA 0xC2
> +#define MADERA_GP_FN_HPOUT2R_ENA 0xC3
> +#define MADERA_GP_FN_HPOUT3L_ENA 0xC4
> +#define MADERA_GP_FN_HPOUT4R_ENA 0xC5
> +#define MADERA_GP_FN_SPKOUTL_ENA 0xC6
> +#define MADERA_GP_FN_SPKOUTR_ENA 0xC7
> +#define MADERA_GP_FN_HPOUT1L_DIS 0xD0
> +#define MADERA_GP_FN_HPOUT1R_DIS 0xD1
> +#define MADERA_GP_FN_HPOUT2L_DIS 0xD2
> +#define MADERA_GP_FN_HPOUT2R_DIS 0xD3
> +#define MADERA_GP_FN_HPOUT3L_DIS 0xD4
> +#define MADERA_GP_FN_HPOUT4R_DIS 0xD5
> +#define MADERA_GP_FN_SPKOUTL_DIS 0xD6
> +#define MADERA_GP_FN_SPKOUTR_DIS 0xD7
> +#define MADERA_GP_FN_SPK_SHUTDOWN 0xE0
> +#define MADERA_GP_FN_SPK_OVH_SHUTDOWN 0xE1
> +#define MADERA_GP_FN_SPK_OVH_WARN 0xE2
> +#define MADERA_GP_FN_TIMER1_STATUS 0x140
> +#define MADERA_GP_FN_TIMER2_STATUS 0x141
> +#define MADERA_GP_FN_TIMER3_STATUS 0x142
> +#define MADERA_GP_FN_TIMER4_STATUS 0x143
> +#define MADERA_GP_FN_TIMER5_STATUS 0x144
> +#define MADERA_GP_FN_TIMER6_STATUS 0x145
> +#define MADERA_GP_FN_TIMER7_STATUS 0x146
> +#define MADERA_GP_FN_TIMER8_STATUS 0x147
> +#define MADERA_GP_FN_EVENTLOG1_FIFO_STS 0x150
> +#define MADERA_GP_FN_EVENTLOG2_FIFO_STS 0x151
> +#define MADERA_GP_FN_EVENTLOG3_FIFO_STS 0x152
> +#define MADERA_GP_FN_EVENTLOG4_FIFO_STS 0x153
> +#define MADERA_GP_FN_EVENTLOG5_FIFO_STS 0x154
> +#define MADERA_GP_FN_EVENTLOG6_FIFO_STS 0x155
> +#define MADERA_GP_FN_EVENTLOG7_FIFO_STS 0x156
> +#define MADERA_GP_FN_EVENTLOG8_FIFO_STS 0x157
> +
> +struct snd_soc_dapm_context;
> +
> +/*
> + * struct madera - internal data shared by the set of Madera drivers
> + *
> + * This should not be used by anything except child drivers of the Madera MFD
> + *
> + * @regmap: pointer to the regmap instance for 16-bit registers
> + * @regmap_32bit: pointer to the regmap instance for 32-bit registers
> + * @dev: pointer to the MFD device
> + * @type: type of codec
> + * @rev: silicon revision
> + * @type_name: display name of this codec
> + * @num_core_supplies: number of core supply regulators
> + * @core_supplies: list of core supplies that are always required
> + * @dcvdd: pointer to DCVDD regulator
> + * @internal_dcvdd: true if DCVDD is supplied from the internal LDO1
> + * @pdata: our pdata
> + * @irq_dev: the irqchip child driver device
> + * @irq: host irq number from SPI or I2C configuration
> + * @out_clamp: indicates output clamp state for each analogue
> output
> + * @out_shorted: indicates short circuit state for each analogue output
> + * @hp_ena: bitflags of enable state for the headphone outputs
> + * @num_micbias: number of MICBIAS outputs
> + * @num_childbias: number of child biases for each MICBIAS
> + * @dapm: pointer to codec driver DAPM context
> + * @notifier: notifier for signalling events to ASoC machine
> driver
> + */
> +struct madera {
> + struct regmap *regmap;
> + struct regmap *regmap_32bit;
> +
> + struct device *dev;
> +
> + enum madera_type type;
> + unsigned int rev;
> + const char *type_name;
> +
> + int num_core_supplies;
> + struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
> + struct regulator *dcvdd;
> + bool internal_dcvdd;
> +
> + struct madera_pdata pdata;
> +
> + struct device *irq_dev;
> + int irq;
> +
> + unsigned int num_micbias;
> + unsigned int num_childbias[MADERA_MAX_MICBIAS];
> +
> + struct snd_soc_dapm_context *dapm;
> +
> + struct blocking_notifier_head notifier;
> +};
> +#endif
> diff --git a/include/linux/mfd/madera/pdata.h
> b/include/linux/mfd/madera/pdata.h
> new file mode 100644
> index 000000000000..cd4ce12c2ced
> --- /dev/null
> +++ b/include/linux/mfd/madera/pdata.h
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Platform data for Cirrus Logic Madera codecs
> + *
> + * Copyright (C) 2015-2018 Cirrus Logic
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; version 2.
> + */
> +
> +#ifndef MADERA_PDATA_H
> +#define MADERA_PDATA_H
> +
> +#include <linux/kernel.h>
> +#include <linux/regulator/arizona-ldo1.h>
> +#include <linux/regulator/arizona-micsupp.h>
> +#include <linux/regulator/machine.h>
> +
> +#define MADERA_MAX_MICBIAS 4
> +#define MADERA_MAX_CHILD_MICBIAS 4
> +
> +#define MADERA_MAX_GPSW 2
> +
> +struct gpio_desc;
> +struct pinctrl_map;
> +struct madera_irqchip_pdata;
> +struct madera_codec_pdata;
> +
> +/**
> + * struct madera_pdata - Configuration data for Madera devices
> + *
> + * @reset: GPIO controlling /RESET (NULL = none)
> + * @ldo1: Substruct of pdata for the LDO1 regulator
> + * @micvdd: Substruct of pdata for the MICVDD regulator
> + * @irqchip: Pointer to optional pdata for the irqchip driver
> + * @gpio_base: Base GPIO number
> + * @gpio_configs: Array of GPIO configurations (See
> Documentation/pinctrl.txt)
> + * @n_gpio_configs: Number of entries in gpio_configs
> + * @codec: Pointer to optional pdata for the ASoC codec driver
> + * See include/sound/madera-pdata.h
> + * @gpsw: General purpose switch mode setting (See the SW1_MODE field
> + * in the datasheet for the available values for your codec)
> + */
> +struct madera_pdata {
> + struct gpio_desc *reset;
> +
> + struct arizona_ldo1_pdata ldo1;
> + struct arizona_micsupp_pdata micvdd;
> +
> + struct madera_irqchip_pdata *irqchip;
> +
> + int gpio_base;
> +
> + const struct pinctrl_map *gpio_configs;
> + int n_gpio_configs;
> +
> + struct madera_codec_pdata *codec;
> +
> + u32 gpsw[MADERA_MAX_GPSW];
> +};
This doesn't look like platform data. Where does it come from?
> +#endif
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
