4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Philipp Rossak <embe...@gmail.com>

commit 70b8d21496758dd7ff600ec9de0ee3812fac7a40 upstream.

This patch fixes a bootproblem with the Bananapi M2 board. Since there
are some regulators missing we add them right now. Those values come
from the schematic, below you can find a small overview:

* reg_aldo1:  3,3V, powers the wifi
* reg_aldo2:  2,5V, powers the IO of the RTL8211E
* reg_aldo3:  3,3V, powers the audio

* reg_dldo1:  3,0V, powers the RTL8211E
* reg_dldo2:  2,8V, powers the analog part of the csi
* reg_dldo3:  3,3V, powers misc
* reg_eldo1:  1,8V, powers the csi
* reg_ldo_io1:1,8V, powers the gpio

* reg_dc5ldo: needs to be always on

This patch updates also the vmmc-supply properties on the mmc0 and mmc2
node to use the allready existent regulators.
We can now remove the sunxi-common-regulators.dtsi include since we
don't need it anymore.

Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2")
Cc: <sta...@vger.kernel.org>
Signed-off-by: Philipp Rossak <embe...@gmail.com>
Signed-off-by: Maxime Ripard <maxime.rip...@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>

---
 arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts |   61 +++++++++++++++++++++--
 1 file changed, 58 insertions(+), 3 deletions(-)

--- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -42,7 +42,6 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -99,6 +98,7 @@
        pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
        phy = <&phy1>;
        phy-mode = "rgmii";
+       phy-supply = <&reg_dldo1>;
        snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
        snps,reset-active-low;
        snps,reset-delays-us = <0 10000 30000>;
@@ -118,7 +118,7 @@
 &mmc0 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
-       vmmc-supply = <&reg_vcc3v0>;
+       vmmc-supply = <&reg_dcdc1>;
        bus-width = <4>;
        cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
        cd-inverted;
@@ -132,7 +132,7 @@
 &mmc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc2_pins_a>;
-       vmmc-supply = <&reg_vcc3v0>;
+       vmmc-supply = <&reg_aldo1>;
        mmc-pwrseq = <&mmc2_pwrseq>;
        bus-width = <4>;
        non-removable;
@@ -195,7 +195,28 @@
 
 #include "axp22x.dtsi"
 
+&reg_aldo1 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <2500000>;
+       regulator-max-microvolt = <2500000>;
+       regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
 &reg_dc5ldo {
+       regulator-always-on;
        regulator-min-microvolt = <700000>;
        regulator-max-microvolt = <1320000>;
        regulator-name = "vdd-cpus";
@@ -235,6 +256,40 @@
        regulator-name = "vcc-dram";
 };
 
+&reg_dldo1 {
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+       regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vdd-csi";
+       status = "okay";
+};
+
+&reg_ldo_io1 {
+       regulator-always-on;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vcc-pm-cpus";
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pins_a>;


Reply via email to