Hi,

On 30 March 2018 at 15:02, Baolin Wang <baolin.w...@linaro.org> wrote:
> The Spreadtrum debounce EIC and latch EIC can not support edge trigger,
> but most GPIO users (like gpio-key driver) only use the edge trigger,
> thus the EIC driver need add some support to emulate the edge trigger
> to satisfy this requirement.
>
> Signed-off-by: Baolin Wang <baolin.w...@linaro.org>

Any comments for this patch set? Thanks.

> ---
>  drivers/gpio/gpio-eic-sprd.c |   73 
> ++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 73 insertions(+)
>
> diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
> index de7dd93..e0d6a0a 100644
> --- a/drivers/gpio/gpio-eic-sprd.c
> +++ b/drivers/gpio/gpio-eic-sprd.c
> @@ -300,6 +300,7 @@ static int sprd_eic_irq_set_type(struct irq_data *data, 
> unsigned int flow_type)
>         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
>         struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
>         u32 offset = irqd_to_hwirq(data);
> +       int state;
>
>         switch (sprd_eic->type) {
>         case SPRD_EIC_DEBOUNCE:
> @@ -310,6 +311,17 @@ static int sprd_eic_irq_set_type(struct irq_data *data, 
> unsigned int flow_type)
>                 case IRQ_TYPE_LEVEL_LOW:
>                         sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
>                         break;
> +               case IRQ_TYPE_EDGE_RISING:
> +               case IRQ_TYPE_EDGE_FALLING:
> +               case IRQ_TYPE_EDGE_BOTH:
> +                       state = sprd_eic_get(chip, offset);
> +                       if (state)
> +                               sprd_eic_update(chip, offset,
> +                                               SPRD_EIC_DBNC_IEV, 0);
> +                       else
> +                               sprd_eic_update(chip, offset,
> +                                               SPRD_EIC_DBNC_IEV, 1);
> +                       break;
>                 default:
>                         return -ENOTSUPP;
>                 }
> @@ -324,6 +336,17 @@ static int sprd_eic_irq_set_type(struct irq_data *data, 
> unsigned int flow_type)
>                 case IRQ_TYPE_LEVEL_LOW:
>                         sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 
> 1);
>                         break;
> +               case IRQ_TYPE_EDGE_RISING:
> +               case IRQ_TYPE_EDGE_FALLING:
> +               case IRQ_TYPE_EDGE_BOTH:
> +                       state = sprd_eic_get(chip, offset);
> +                       if (state)
> +                               sprd_eic_update(chip, offset,
> +                                               SPRD_EIC_LATCH_INTPOL, 0);
> +                       else
> +                               sprd_eic_update(chip, offset,
> +                                               SPRD_EIC_LATCH_INTPOL, 1);
> +                       break;
>                 default:
>                         return -ENOTSUPP;
>                 }
> @@ -405,6 +428,55 @@ static int sprd_eic_irq_set_type(struct irq_data *data, 
> unsigned int flow_type)
>         return 0;
>  }
>
> +static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
> +                                   unsigned int offset)
> +{
> +       struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
> +       struct irq_data *data = irq_get_irq_data(irq);
> +       u32 trigger = irqd_get_trigger_type(data);
> +       int state, post_state;
> +
> +       /*
> +        * The debounce EIC and latch EIC can only support level trigger, so 
> we
> +        * can toggle the level trigger to emulate the edge trigger.
> +        */
> +       if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
> +            sprd_eic->type != SPRD_EIC_LATCH) ||
> +           !(trigger & IRQ_TYPE_EDGE_BOTH))
> +               return;
> +
> +       sprd_eic_irq_mask(data);
> +       state = sprd_eic_get(chip, offset);
> +
> +retry:
> +       switch (sprd_eic->type) {
> +       case SPRD_EIC_DEBOUNCE:
> +               if (state)
> +                       sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
> +               else
> +                       sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
> +               break;
> +       case SPRD_EIC_LATCH:
> +               if (state)
> +                       sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 
> 0);
> +               else
> +                       sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 
> 1);
> +               break;
> +       default:
> +               sprd_eic_irq_unmask(data);
> +               return;
> +       }
> +
> +       post_state = sprd_eic_get(chip, offset);
> +       if (state != post_state) {
> +               dev_warn(chip->parent, "EIC level was changed.\n");
> +               state = post_state;
> +               goto retry;
> +       }
> +
> +       sprd_eic_irq_unmask(data);
> +}
> +
>  static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
>  {
>         enum sprd_eic_type type = *(enum sprd_eic_type *)data;
> @@ -448,6 +520,7 @@ static void sprd_eic_handle_one_type(struct gpio_chip 
> *chip)
>                                         bank * SPRD_EIC_PER_BANK_NR + n);
>
>                         generic_handle_irq(girq);
> +                       sprd_eic_toggle_trigger(chip, girq, n);
>                 }
>         }
>  }
> --
> 1.7.9.5
>



-- 
Baolin.wang
Best Regards

Reply via email to